Introduction
As a homeowner, dealing with appliance breakdowns can be frustrating and stressful. One of the most common issues homeowners face today with their washing machines is the OE error code on Samsung Washers. This error indicates that there is an issue with draining the water out of the machine and could result in a potential flood in your laundry room.
The Samsung washer OE code could be caused by a range of factors, including a blocked or clogged drainage hose, faulty pump, or drain filter. However, the good news is that there are simple ways you can fix this error and prevent it from happening again.
In this article, we will dive into the reasons why you may be experiencing an OE error on your Samsung washer, and we will provide you with nine easy and practical solutions to fix it right away. No need to call in a repair professional; you can fix the problem with your Samsung washer on your own in no time, regardless of your technical ability.
So, whether you’re a DIY enthusiast or a homeowner looking for easy solutions to fix the OE error on your Samsung washer, we’ve got you covered. Read on to learn more about the causes of the OE error code and how to fix it efficiently and effectively.
What is the Samsung Washer OE Code
One of the most common error codes that Samsung washing machines display is the OE code. If you’ve ever had this code pop up on your machine, you know how frustrating it can be. Fortunately, with a little troubleshooting and some basic knowledge, you can quickly find the source of the problem and fix it.
The OE code stands for “overflow error.” This means that the washing machine has detected that there is too much water in the drum, which can be caused by a few different issues.
One of the most common reasons for the OE code is a blockage in the machine’s drainage system. If the water that’s supposed to be drained from the machine isn’t able to exit via the drain hose, it can cause water to accumulate and trigger the overflow sensor.
Another common culprit for the OE code is a faulty water inlet valve. This valve acts as a gatekeeper to control the amount of water that enters the machine. If it isn’t functioning properly, too much water can enter the drum and cause an overflow error.
In some cases, the OE code can also be triggered by a malfunctioning water-level sensor. This sensor is responsible for monitoring the amount of water in the drum, and if it isn’t working correctly, it can cause a false reading that leads to an overflow error.
While the OE code can be frustrating, it’s usually not a serious issue and can be easily fixed with the right approach. The following sections will outline some of the best ways to diagnose and solve the problem, so you can get your washing machine back up and running in no time.
What Causes the OE Code
When it comes to doing laundry, having a reliable washer is crucial to keep your clothes clean and fresh. However, if you’re faced with an OE code on your Samsung washer, it can be frustrating and confusing. The OE code stands for “overflow error,” indicating that the washer has detected an excessive amount of water in the drum or that the pump is not draining properly.
Here are some of the most common causes of the OE code in a Samsung washer:
1. Clogged or improperly installed drain hose – If the drain hose is bent or kinked, it can prevent the water from flowing out of the washer, leading to an overflow error. Check to ensure that the drain hose is free from any obstructions and is installed correctly.
2. Clogged drain pump filter – Over time, debris like lint, coins, and hair can accumulate in the drain pump filter, restricting the flow of water and causing an overflow error. Refer to the user manual on how to clean the drain pump filter to avoid the OE code.
3. Faulty drain pump – If your drain pump is damaged or not operating correctly, it can prevent the water from draining out of the washer, leading to an overflow error. In this case, you will need to replace the drain pump.
4. Internal blockage – The OE code can also be caused by an internal blockage within the washer, such as a clog in the drain hose or pump. In this case, a professional technician may be needed to diagnose and fix the issue.
5. Overloading the washer – If you have overloaded the washer with too many clothes or extra bulky items, the washer may not be able to pump out the water properly, leading to an overflow error. Make sure to follow the manufacturer’s guidelines on loading your washer to avoid the OE code.
6. Faulty water level sensor – The water level sensor in your Samsung washer measures the amount of water in the drum. If this sensor is damaged or not working correctly, it can trigger the OE code.
7. Defective control board – The control board in your washer regulates the functions of the machine. If it becomes damaged or malfunctions, it can cause issues like the OE code.
8. Drain hose position – Improper placement of the drain hose can cause the OE code. Ensure that the hose is placed high enough while draining.
9. Improper voltage – Sometimes, low voltage can lead to malfunction of Samsung washers. Make sure to check the voltage being supplied to the washer.
These are just a few of the possible causes of the OE code in your Samsung washer. Addressing these issues promptly can help avoid damage to your washer and keep it running smoothly. In the next section, we will discuss some DIY tips on how to fix the OE code.
Common Reasons for the OE Code
If you have a Samsung washer and frequently encounter the OE code, you’re not alone. This particular code indicates a problem with the washer’s draining system. Usually, this means that there’s something clogged in the drain filter or hose, preventing the washer from draining the water out efficiently.
Here are the most common reasons for the OE code:
1. Clogged Drain Hose: If your washer’s drain hose is clogged, it won’t be able to remove the water from the tub, resulting in the OE code.
2. Clogged Washer Filter: The drain filter that’s located at the bottom of the washer can get clogged with dirt, lint, and other debris over time.
3. Dirty Water Level Sensor: The washer’s water level sensor might be dirty or faulty, causing the OE code to appear.
4. Pump Failure: If the washer’s pump is damaged or broken, it will prevent the water from being drained from the drum.
5. Oversudsing: Using too much detergent can cause the water to become too sudsy, leading to the OE code.
6. Blocked Outlet Pipe: If the outlet pipe is blocked, the water will not be able to flow out, causing the OE code.
7. Faulty Pressure Sensor or Switch: A faulty pressure sensor or switch can cause the washing machine to believe there is an issue with draining the water and trigger the OE code.
8. Damaged Impeller: The impeller located inside the washer pump ensures that laundry water is effectively drained from the washer drum. A damaged impeller can lead to an OE error.
9. Kinked Drain Hose: A kinked drain hose can create a blockage in the hose, preventing the water from draining out of the washer’s drum evenly.
Understanding these common reasons can help you diagnose and fix the OE code on your Samsung washer more effectively. In the next section, we will explore possible solutions to ensure you can quickly get back to washing your dirty laundry in no time.
Benefits of Fixing the OE Code
Fixing the OE code on your Samsung washer can not only save you a lot of headache, but it also has a number of benefits. Understanding these benefits can help you stay motivated to fix the issue and continue to maintain and improve your home.
First and foremost, fixing the OE code can ensure that your clothes are washed properly. This code can indicate a problem with water flow or draining, which can lead to dirty clothes or improperly cleaned clothing. By fixing the issue, you can ensure that your washer is functioning correctly, leading to cleaner, fresher clothes.
Fixing the OE code can also save you money in the long run. A malfunctioning washer can cause your water and electricity bills to skyrocket. By fixing the issue, you can prevent these unnecessary expenses and keep your utility costs low.
Beyond these practical benefits, fixing the OE code can also lead to peace of mind. We’ve all experienced the stress and frustration of dealing with a malfunctioning appliance. By fixing the OE code, you can rid yourself of this stress and enjoy the confidence that comes with a functioning washing machine.
Finally, fixing the OE code can help you maintain and improve your home overall. By staying on top of issues with your appliances, you can keep your home running smoothly and ensure that your investment remains in top condition. This can help you avoid costly repairs down the road and keep your home functioning efficiently.
Overall, fixing the OE code on your Samsung washer is beneficial in numerous ways. From ensuring proper cleaning of clothes to saving you money and leading to peace of mind, there are many reasons to take care of this issue as soon as possible. Keep these benefits in mind as you work to keep your home in top condition and functioning at its best.
Safety Precautions
Before you start troubleshooting your Samsung washer OE code issue, it’s vital to take several safety precautions to prevent accidents that could result in injury or damage to the machine.
1. Unplug the Washing Machine: Always turn off and unplug the Samsung washer before starting to troubleshoot the issue.
2. Wear Protective Gear: Ensure to wear protective gear such as work gloves and goggles when opening the washer to avoid injuring your eyes, hands or any other part of your body.
3. Keep Children & Pets Away: Make sure to keep children and pets out of the laundry room during the entire troubleshooting process. This will not only keep them safe but also prevent the washer from getting damaged.
4. Do not Overload the Washer: Overloading the Samsung washer could cause it to strain, which can lead to various problems, including the OE code.
5. Use Genuine Samsung Replacement Parts: Always use genuine Samsung replacement parts in case you need to replace any components in the washer. Using counterfeit or low-quality parts can damage the machine and even cause more problems.
6. Follow the Operating Manual: Always refer to the washer’s manual for any instructions or precautions before attempting to troubleshoot any issues.
7. Keep the Washer Clean: Ensure to clean the washer regularly to prevent dirt, lint, and debris from accumulating and clogging the hoses, which can lead to the OE code.
8. Disconnect Water Supplies: Before disassembling the machine to troubleshoot the problem, turn off the water supply and disconnect it to avoid flooding or other accidents.
9. Seek Professional Help: If you’re not confident in your ability to troubleshoot and fix the Samsung washer OE code issue, don’t hesitate to seek professional help. Inexperienced and untrained attempts could make the problem worse and even damage the machine beyond repair.
By following these safety precautions, you can locate and troubleshoot the Samsung washer OE code issue using the methods recommended in the next section.
Tools You’ll Need
Before attempting to fix the OE code on your Samsung washer, it’s important to have the necessary tools on hand. Here are the tools you’ll need:
1. Pliers: You’ll need pliers to detach the hoses from the washer and to clamp and unclamp them during the cleaning process.
2. Screwdriver: A screwdriver will be needed to remove the screws that secure the back panel of the washer.
3. Bucket: You’ll need a bucket or container to catch water that may spill out during the cleaning process.
4. Cleaning solution: An ideal cleaning solution for your Samsung washer is a mixture of warm water and vinegar, which will help remove any dirt buildup.
5. Towel: Have a few towels on hand to clean up spills and to protect the floor while you’re working on the washer.
6. Wire brush: A wire brush will be needed to remove any clogs or dirt buildup in the hoses or pipes.
7. Drain pan: A drain pan placed under the washer will help catch any excess water and prevent water damage to your home.
8. Gloves: Wearing gloves will protect your hands from any sharp edges or debris while you’re working on the washer.
9. Safety glasses: Safety glasses will protect your eyes from any debris that may come loose while you’re using the wire brush.
By having these essential tools on hand, you’ll be prepared to tackle the OE code on your Samsung washer with confidence. Remember to also wear appropriate clothing that you won’t mind getting wet or dirty and to unplug the washer before attempting any repairs.
Method 1: Clean the Drain Hose
One of the most common causes of the Samsung washer OE code is a clogged or blocked drain hose. Over time, dirt, lint, and other debris can build up in the hose, preventing water from draining properly and causing the OE code to appear on the display.
To clean the drain hose and fix the OE code, follow these simple steps:
1. Turn off the washing machine and unplug it from the power source.
2. Locate the drain hose at the back of the machine and carefully detach it from the machine.
3. Have a bucket ready and place it beneath the drain hose to catch any water that may still be inside.
4. Check the hose for any visible debris such as lint, dirt, or any other foreign objects. Carefully remove any debris that you can see.
5. Next, use a plumbing snake or a long, flexible cleaning brush to remove any clogs or blockages inside the hose. Gently insert the tool into the hose and move it around to dislodge any dirt or debris.
6. After cleaning the hose, reconnect it to the washer and ensure it is securely attached.
7. Turn the machine on and check if the OE code has been resolved.
8. Once the code has been resolved, run the machine through a cycle to ensure everything is working correctly.
9. Finally, dispose of any dirt or debris you have collected and clean the bucket and any tools you have used.
Cleaning the drain hose is a simple but effective way to fix the Samsung washer OE code. By following these easy steps, you can get your washing machine back in good working order in no time.
Method 2: Clean the Debris Filter
Another common cause of the Samsung washer OE code is a clogged debris filter. The debris filter collects lint, hair, coins, and any other small objects that may have been left in the pockets of clothes. Over time, this debris can build up in the filter, causing blockages that prevent the washer from draining properly.
Cleaning the debris filter is a relatively easy task that should be performed regularly. Ideally, it should be cleaned at least once a month to prevent any build-up from occurring. Here’s how to do it:
Step 1: Turn off the power to the washer and unplug it from the wall.
Step 2: Locate the debris filter, which is typically found on the bottom front of the washer behind a small door or panel. If you can’t find it, consult your owner’s manual.
Step 3: Place a towel or shallow pan beneath the debris filter to catch any water that may spill out.
Step 4: Open the debris filter door or panel and remove the filter.
Step 5: Rinse the filter under running water to remove any debris.
Step 6: Use a soft brush or toothbrush to gently scrub any stubborn debris off the filter.
Step 7: Reinsert the filter and close the door or panel.
Step 8: Plug the washer back in and turn it on.
Step 9: Start a short wash cycle to confirm that the OE error code has disappeared.
Cleaning the debris filter is a simple and effective way to fix the OE error code on your Samsung washer. By performing this task regularly, you can prevent blockages from occurring and extend the life of your washing machine.
Method 3: Check the Water Supply
Another common reason for the Samsung OE error code is a problem with the water supply. If the washer is unable to fill up with sufficient water, it may display the OE code and stop working. There are a few things you can check to ensure the water supply is not the culprit.
First, check if there is an issue with the water supply in your area. If your neighborhood or building is experiencing low water pressure or a water outage, the washer will not be able to fill up properly. You can contact your local water supplier to inquire about any water supply issues in your area.
Next, inspect the water hoses leading to the washer to ensure they are not kinked or damaged. If the hoses are crimped or bent, they may prevent the water from flowing smoothly into the washer. Replace any damaged hoses to ensure a steady flow of water.
Another thing to check is the washing machine’s inlet filters. These filters are located at the end of the water hose where it connects to the washer. If the filters are dirty or clogged, water flow will be restricted, causing the OE error code. Remove the filters and clean them thoroughly before reinstalling them.
It is also recommended to check the water inlet valve. The valve controls the flow of water into the washing machine and if it is not functioning properly, the OE error code may be displayed. Inspect the valve for any damage or signs of wear and replace it if necessary.
Finally, if none of the above steps fix the issue, you may want to consider calling a professional to inspect the washer for any internal issues that may be causing the OE code. A certified technician can diagnose and fix any complex issues with the machine’s water supply, ensuring your Samsung washer is up and running again in no time.
Method 4: Check the Drain Pump
If the OE code still persists after cleaning the drain hose, the next component to check would be the drain pump. The drain pump is responsible for pumping water out of the washer during the drain cycle. If the pump is not working properly, it can cause the OE code to appear.
To check the drain pump, first, turn off the power to the washer and unplug it from the wall. Then, locate the drain pump at the bottom of the washer. It will have a long hose attached to it that leads to the drain hose.
Once you have located the drain pump, you will need to remove the two hoses connected to it. Be prepared for water to spill out, so make sure you have a towel or bucket handy. Check the hoses for any blockages or damage and clean or replace them if necessary.
Next, remove the drain pump from the washer and inspect it for any visible damage or blockages. If you do find any damage or blockages, you will need to replace the pump. However, if the pump appears to be in good condition, you can test it using a multimeter.
To test the drain pump with a multimeter, set the multimeter to the continuity setting. Then, touch the probes to the two terminals on the drain pump. If the multimeter beeps, the pump is working correctly. If it does not beep, the pump is faulty and needs to be replaced.
In conclusion, a faulty drain pump can be the cause of the OE code on a Samsung washer. Check the drain pump and its hoses for any damage or blockages and test it with a multimeter to determine if it needs to be replaced. By following these steps, you can easily eliminate the drain pump as the culprit of the OE code and get your washer back in working order in no time.
Method 5: Check the Door Seal
The door seal, also known as a gasket, is a rubber lining around the perimeter of the washer door. Its primary job is to create a water-tight seal between the door and the drum to prevent leakage. If the door seal is damaged, it can lead to water seepage and trigger the OE error code.
To check the door seal, inspect it for visible damages such as cracks, tears, or bulges. If you notice any such signs, it’s time to replace the seal. To do this, locate the model number for your Samsung washer and purchase the appropriate gasket replacement kit from a reputable retailer. These kits usually come with all the necessary tools and instructions to make the replacement process quick and easy.
Another common issue with the door seal is that it may accumulate dirt and debris over time. This buildup can compromise the seal’s effectiveness, leading to leaks and the dreaded OE error code. To avoid this, give the door seal a quick clean every few months. Use a damp cloth to wipe down the rubber lining, taking care to remove any dirt or grime that may have collected in the crevices.
In conclusion, checking the door seal is an essential step in troubleshooting the OE error code on your Samsung washer. Make sure to inspect it regularly for visible damage and clean it every few months to prevent dirt and debris buildup. If the seal is damaged, purchase a replacement kit and follow the instructions provided to ensure a successful replacement. With this method under your belt, you’re well on your way to a perfectly functioning and reliable Samsung washer.
Method 6: Check the Pressure Switch
The pressure switch in the Samsung washer is responsible for detecting the water level in the drum and signaling the control board when it should stop or start the pump. If the pressure switch is not functioning correctly, it can cause the OE code to appear.
To check the pressure switch, unplug the washer from the electrical outlet and remove the top panel. Locate the pressure switch (usually located in the rear of the machine) and remove the hose that connects to it. Check for any clogs, damage, or leaks in the hose. If it looks clear, blow into the hose and listen for a clicking sound.
If you do not hear a clicking sound, the pressure switch may need replacing. However, before you do so, you can try cleaning it. Use a cotton swab dipped in rubbing alcohol to clean the contacts of the pressure switch.
If cleaning the pressure switch does not work, replace it with a new one. Be sure to get the correct pressure switch for your Samsung model, as there are different types of pressure switches available in the market.
To replace the pressure switch, disconnect the electrical wires that connect to it. Unscrew or unclip the switch from the washer and remove it. Replace it with the new one by screwing or clipping it into place. Reconnect the electrical wires and reattach the hose to the switch.
Once you have completed this step, plug the washer back in and run a cycle to check if the OE code has been resolved. If the code persists, move on to the next method.
Method 7: Check the Drainage Hose
Another factor that can cause the Samsung washer to display the OE fault code is a problem with the drainage hose. The drainage hose is typically connected to the back of the washer and is responsible for draining used water from the machine. If there is any blockage or kinks present in the drainage hose, it can impede the machine’s ability to discharge water, leading to the OE error code.
To check whether the drainage hose is the cause of the problem, begin by switching off the machine and unplugging it from the power source. Next, locate the drainage hose situated at the back of the machine and examine it for any signs of damage or kinks.
If the hose looks intact, remove it from its connection, and check for any obstructions inside the hose and the connecting point. You can use a long pipe cleaner or wire hanger to remove any dirt or debris clogging the hose, but be gentle while doing so to avoid causing any damage.
After cleaning or unblocking the hose, place it back in its position, ensuring that it’s connected securely. Once you’re done, turn on the machine, run it through a cycle, and check for the OE error code. If the issue persists, move on to the next solution.
In conclusion, checking the Drainage Hose is a vital step to resolving Samsung Washer OE Code issues. A blocked or damaged hose can cause significant harm to the washing machine. Be sure to check and ensure that it is properly installed and is free from any obstructions that might lead to an error code.
Method 8: Check the Control Board
If none of the previous methods we’ve discussed fixed the OE error code on your Samsung washer, then it’s time to check the control board. As we mentioned earlier, the control board is the brain of your washer, and any issues with it can lead to error codes like OE.
Here are the steps to check the control board:
Step 1: Unplug the washer from the power source to prevent any electrical hazards.
Step 2: Remove the top panel of the washer by unscrewing the screws at the back.
Step 3: Locate the control board, which is usually at the top of the washer near the back.
Step 4: Check the control board for any visible signs of damage, such as burn marks or loose cables. If you see any of these signs, you’ll need to replace the control board.
Step 5: If there are no visible signs of damage, use a multimeter to test the voltage at the control board. Follow the instructions in your washer’s manual on how to use a multimeter.
Step 6: If the voltage is correct, then the control board is most likely working fine. But if the voltage is incorrect, you’ll need to replace the control board.
Step 7: Replace the control board by carefully disconnecting the cables and replacing it with a new one. Follow the instructions in your washer’s manual on how to install the new control board.
Step 8: Reassemble the washer by putting the top panel back on and screwing it in place.
Step 9: Plug the washer back in and test it to see if the OE error code is gone.
Checking the control board may seem like an advanced task, but it’s a crucial step in troubleshooting your Samsung washer’s OE error code. If you don’t feel comfortable doing it yourself, it’s best to call a professional to help you out. Remember, safety comes first!
Method 9: Check the Pump Motor
If you have tried all of the previous methods and your Samsung washer still displays an OE code, it is possible that the issue lies with the pump motor. The pump motor is responsible for removing excess water from the machine during the wash cycle, so if it is not functioning properly, this can lead to the OE error code.
To check the pump motor, you will need to access it from the bottom of the washer. This may require removing the back panel and disconnecting hoses to gain access. Once you have located the pump motor, check for any blockages or obstructions that may be hindering its operation. Clear any debris that you find.
Next, you should check the wiring connections to ensure that they are properly connected. If the connections are loose or corroded, this can cause the pump motor to malfunction. If you find any issues with the wiring connections, reattach them securely or replace any damaged wires.
If you have checked the pump motor and found no obstructions or wiring issues, the problem may be with the motor itself. You may need to replace the pump motor to resolve the OE code issue.
In conclusion, an OE code on your Samsung washer can be an indication of various issues, ranging from minor to major. By following the steps outlined in this article, you can diagnose and resolve the issue on your own without having to call in a professional. Remember to consult your user manual for specific instructions and always exercise caution when working on electrical appliances.
Additional Tips for Preventing the OE Code
While understanding the causes and solutions to the Samsung washer OE code is essential, preventing the problem in the first place can save you from the headache of troubleshooting it. To optimize the performance of your washer and reduce the risk of OE code errors, consider the following tips.
1. Use high-efficiency detergents.
HE detergents create fewer suds than traditional detergents, reducing the chances of forming blockages in the pump filter or drain hose.
2. Measure the detergent carefully.
Overdosing the detergent can create too many suds, leading to blockages and eventually, OE code errors.
3. Don’t overload your washer.
Overloading the washer forces the machine to work harder, increasing the likelihood of errors occurring.
4. Avoid washing large items alone.
Washing large items such as comforters or blankets by themselves can create an imbalance in the drum, leading to vibration and eventual OE code errors.
5. Don’t wash waterproof or water-resistant items.
Items such as raincoats or mattress protectors have a water-resistant coating that can break down and clog the drain pump filter.
6. Clean your washer regularly.
Keeping the drum, pump filter, and drain hose clean can prevent blockages, reducing the occurrence of the OE error code.
7. Check the pockets before washing.
Small items such as coins, hairpins, and paper clips can cause blockages in the drain pump filter.
8. Check the drain hose regularly.
Ensure the drain hose is not kinked or clogged, which can cause water to back up and lead to OE code errors.
9. Regularly inspect the seal around the washer door.
Ensure there are no cracks or gaps in the seal, which can allow water to escape and potentially cause blockages.
By following these preventative tips, you can significantly reduce the likelihood of encountering the Samsung washer OE code error. Taking good care of your washer will not only save you the trouble of troubleshooting but also prolong its lifespan and improve its performance.
Frequently Asked Questions
Q: What does the Samsung washer OE code mean?
A: The Samsung washer OE code is an indication that your washer is experiencing an overflow error. This means that the washer has detected an overfill of water and cannot drain properly.
Q: How do I fix the Samsung washer OE code?
A: There are a few ways to fix the Samsung washer OE code. Firstly, you could try adjusting the load size to ensure that you are not overloading the washer. Secondly, you could check the drain hose and make sure that it is not clogged. Finally, if these steps do not work, you may need to replace the drain pump or the water level sensor.
Q: Can I still use my Samsung washer if I am experiencing the OE code?
A: It is not recommended that you continue to use your washer if you are experiencing the OE code. This error can cause damage to your washer and potentially lead to a flood or other water damage.
Q: How often should I check my Samsung washer for the OE code?
A: It is a good idea to periodically check your Samsung washer for the OE code, especially if you are experiencing problems with the washer draining properly. Checking your washer regularly can help you catch any potential issues before they become major problems.
Q: Is the OE code covered under warranty?
A: The OE code may be covered under warranty if it is determined that the issue is due to a manufacturing defect. However, if the issue is due to user error or neglect, the repair may not be covered under warranty. It is important to read the warranty details carefully to understand what is covered and what is not.
Conclusion
In conclusion, if you own a Samsung washer and have encountered the OE error code, don’t panic. The good news is that there are several possible causes and solutions that you could try to fix the issue. Remember, before attempting any of the fixes listed above, it’s always wise to unplug the washer from the power source and wait for a few minutes to allow any residual current to dissipate.
If the OE code continues to show up after trying the suggested solutions, it may be a sign of a more serious problem that requires professional attention. In that case, we recommend calling in a qualified electrician or appliance repair technician to diagnose and fix the issue.
As a home improvement enthusiast and expert, I can assure you that taking proper care of your washing machine and being vigilant about identifying and repairing faults promptly will save you time, money, and frustration in the long run.
We hope that this article has been informative and has provided you with the guidance and advice you need to fix the Samsung Washer OE code problem easily and efficiently. Happy washing!
References
1. “Samsung Washer Error Code OE: What to Do When It Appears.” Dengarden. N.p., n.d. Web. 29 June 2017.
http://dengarden.com/appliances/Samsung-Washer-Error-Code-OE-What-to-Do-When-It-Appears.
2. “Samsung Washer Error Code OE/FC/Fixing How To Fix Samsung Washer Error Code OE/FC.” YouTube. N.p., 13 Mar. 2016. Web. 29 June 2017.
https://www.youtube.com/watch?v=9rjP4bHyu-Y.
3. “Samsung Top Load Washer Model WA400PJHDWR/AA – Troubleshooting and Tech Tips.” Benchmark Services. N.p., n.d. Web. 29 June 2017.