Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Photo of author
Written By Maria K.



Your dishwasher is one of the most important appliances in your home, saving you time and effort in cleaning up after meals. However, when it stops working, it can cause a lot of frustration and inconvenience. One brand of dishwasher that has gained a significant market share in recent years is Samsung.

If your Samsung dishwasher is not turning on, then don’t panic. There are many simple solutions that you can try to fix the problem yourself. In this article, we will provide you with 11 easy ways to fix your Samsung dishwasher and get it back to its efficient cleaning mode.

Before we dive into the solutions, let’s take a look at some common causes of a non-functioning Samsung dishwasher. One of the most common reasons why a dishwasher may not turn on is due to an electrical problem, such as a blown fuse or a tripped circuit breaker. Another cause may be a malfunctioning control board or a faulty door switch.

Now that we know the common causes of a Samsung dishwasher not turning on, let’s move on to the solutions. But please keep in mind that if you are not comfortable with electrical repairs or if your dishwasher is still under warranty, it’s best to call a professional repair service to fix it.

Understanding why Samsung dishwasher is not turning on

Imagine you have a pile of dirty dishes in the sink and you load them all in your Samsung dishwasher, only to find out that it’s not turning on. It’s frustrating, right? Before you panic and call for professional help, take a moment to diagnose the problem. Here are some common reasons why your Samsung dishwasher is not turning on:

1. Power supply issues

First and foremost, check if your Samsung dishwasher is receiving power. Check if the power cord is plugged in properly or if the circuit breaker has tripped. Also, make sure that the outlet is working fine by plugging in another appliance.

2. Faulty Control Panel

If the power supply is fine, then the problem could be with the dishwasher’s control panel. If you notice that the lights or buttons on the control panel are not responding, then the control panel might have malfunctioned. Check for any damage or wear and tear. If you find any, then you might need to replace the control panel.

3. Door Latch Issues

Another reason why your Samsung dishwasher might not be turning on is due to the door latch. If the door latch is not closing properly, then the dishwasher might not start. You can check if the latch is working correctly by opening and closing the door a few times. If you find any problems, try to adjust it or replace it.

4. Overheating

If your Samsung dishwasher has overheated, then it might not turn on. This could be due to a malfunctioning thermostat or a clogged air filter. You can check if the air filter needs cleaning and replace it if necessary.

5. Circuit Board Issues

If none of the above methods worked, then the problem could be with the dishwasher’s circuit board. If the circuit board is malfunctioning, then it might not be sending signals to the dishwasher to turn on. This is a complicated problem and requires professional help.

In conclusion, before you call a professional, make sure you check the power supply, control panel, door latch, overheating, and circuit board. Make sure to follow the manufacturer’s instructions and take necessary precautions while diagnosing and fixing the problem. Happy fixing!

Checking power supply and switch

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

The next step in troubleshooting your Samsung dishwasher is to make sure that the power supply and switch are functioning properly. Here are a few steps to follow:

1. Check the power cord: Ensure the dishwasher is plugged in, and the power cord is not damaged. Check for any kinks, cuts, or frayings that may be preventing proper power flow.

2. Check the power outlet: It is possible that the outlet is not working properly. In this case, plug the dishwasher into another working outlet, and check if it turns on. You can also plug another appliance into the same outlet to confirm if it is the outlet that has fault.

3. Check the circuit breaker: Another possible issue could be a tripped circuit breaker. Check the breaker box to see if the dishwasher’s circuit has tripped, and reset it if necessary.

4. Test the switch: Check the switch on the front of the dishwasher to ensure that it’s not stuck and is making proper contact. If you have a multimeter, you can test the switch for continuity to determine if it’s faulty.

5. Replace the switch: If the switch is faulty, it’s best to replace it. You can buy a replacement switch from any home improvement or appliance store.

6. Call a technician: If none of these steps works or if you don’t feel comfortable making any replacement or repair, it is best to call a technician and have them take a look. They will be able to determine if there is an underlying problem with the main circuit board or some other component that need to be repaired or replaced.

In conclusion, when your Samsung dishwasher won’t turn on, checking the power supply and switch is an important first step. Follow these steps to ensure your dishwasher is getting the power it needs to run properly.

Replacing faulty control board

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Replacing Faulty Control Board:

Sometimes, a dishwasher’s control board can be the culprit behind its inability to turn on. The control board acts as the brain of the dishwasher, controlling all of its functions and ensuring that everything runs smoothly. If the control board is faulty, it can prevent the dishwasher from turning on altogether.

To replace the control board, you will need to follow the specific instructions given in your Samsung dishwasher’s manual. The first step is to turn off the power supply to your dishwasher to avoid electrocution or any kind of damage to your appliance. After that, open the dishwasher’s door and locate the control board.

Carefully remove the screws holding the control board in place and gently pry it out of its socket. Make sure to note down the exact location of any wires connected to the control board and carefully unplug them using a pair of pliers or your fingers. Finally, install the new control board by following the manufacturer’s instructions – usually, this involves plugging in the wires and firmly securing the board in place with screws.

Once you have replaced the control board, it’s time to test the dishwasher to see if it turns on. Again, turn on the power supply to the dishwasher and power it on. If the dishwasher turns on, congratulations – you have successfully fixed the problem! However, if the dishwasher still doesn’t turn on, you may need to explore other potential causes, such as a faulty motor.

In conclusion, replacing a faulty control board is not a difficult task, but it requires some knowledge about the inner workings of your Samsung dishwasher. Make sure to follow all the instructions carefully, and if you’re not comfortable with the procedure, don’t hesitate to call a professional. A properly functioning control board is vital for the overall performance of your dishwasher – so don’t neglect this important maintenance task!

Resetting the control panel

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

If your Samsung dishwasher won’t turn on, the problem may just be a minor glitch in the control panel, which can easily be fixed by resetting it. Here’s how:

1. Turn off the dishwasher by pressing the power button.

2. Unplug the dishwasher from the electrical outlet.

3. Wait for 30 seconds to one minute.

4. Plug the dishwasher back in.

5. Turn the dishwasher back on by pressing the power button.

6. Try running a cycle to see if the dishwasher is now working properly.

If this simple solution doesn’t work, don’t worry, there are several other troubleshooting steps you can take.

We recommend checking if there are any visible damages or signs of wear and tear on the control panel. If there are, it may need to be replaced by a professional.

Additionally, make sure the dishwasher is properly connected to the outlet and that the outlet itself is working. If your dishwasher has a plug with a reset button, make sure to press it and try turning on the dishwasher again.

In some situations, there may also be a power surge that caused the dishwasher to shut down. In this case, it’s important to check if other electronics in your home are also affected. If they are, you may need to have an electrician take a look at your wiring to prevent any future power surges.

By resetting the control panel, you can easily eliminate a number of potential issues that may be causing your Samsung dishwasher not to turn on. If none of these solutions work, it may be necessary to contact a repair professional, who will be able to properly diagnose the issue and offer effective solutions.

Inspecting the door switch

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

One of the most common reasons why your Samsung dishwasher might fail to turn on is a malfunctioning door switch. This switch is responsible for detecting and notifying the dishwasher when the door is securely closed.

To inspect the door switch, the first step is to disconnect the power supply to the dishwasher. This will help you avoid any electric shocks or damage to the appliance.

The door switch is located inside the dishwasher, behind the control panel. To access it, you will need to remove the screws that hold the control panel in place using a screwdriver.

Once you have removed the control panel, locate the door switch and carefully unplug the wires connected to it. Use a multimeter to test the continuity of the switch. If the switch fails the continuity test, it is likely that it is the cause of the dishwasher not turning on.

To fix the problem, you will need to replace the faulty door switch. You can purchase a new switch online or from your nearest home improvement store. Make sure you buy a replacement switch that is compatible with your Samsung dishwasher model.

Installing the new switch is relatively easy. Simply connect the wires to the new switch, plug it back in, and secure the control panel in place with the screws.

If the door switch is not the problem, move on to the next section of this article to learn about other possible causes of your Samsung dishwasher not turning on.

Replacing a broken door latch

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

A door latch is an essential part of any dishwasher. It keeps the door securely shut and prevents water from leaking out. However, if the latch is broken, your dishwasher won’t start. Fortunately, replacing a broken door latch is not difficult and can be done in a few easy steps.

Before you start, make sure you have the right tools for the job. This will include a screwdriver and replacement door latch. You can buy a new door latch online or at your local hardware store.

First, turn off the power to your dishwasher. You can do this by unplugging the power cord or turning off the circuit breaker.

Next, open the dishwasher door and locate the door latch assembly. This will be on the top or side of the door, depending on the make and model of your dishwasher.

Using a screwdriver, remove the screws that hold the door latch assembly in place. Carefully detach the old latch from the dishwasher and disconnect any wires attached to it.

Now, attach the new door latch to the dishwasher. Reconnect any wires that you disconnected from the old latch. Make sure the new latch is securely fastened to the door.

Finally, test the new door latch by closing the dishwasher door and turning on the power. Your dishwasher should start up as normal.

Replacing a broken door latch is a simple and easy fix for a Samsung dishwasher that won’t turn on. With the right tools and a little bit of know-how, you can get your dishwasher up and running again in no time.

Checking the float switch

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

A common reason why your Samsung dishwasher may not be turning on is a faulty float switch. The float switch is responsible for detecting the water level in the dishwasher. When the water level reaches a certain point, the float switch sends a signal to the control panel to start the wash cycle.

To check the float switch, start by removing the access panel located on the bottom of the dishwasher. You can do this by unscrewing the screws or by using a flathead screwdriver to pry it off. Once the panel is removed, locate the float switch. It will be a small round device attached to the bottom of the dishwasher tub.

Next, check the float switch for any visible signs of damage, such as cracks or signs of corrosion. If the float switch appears to be in good condition, then move on to testing it for continuity. To do this, you will need a multimeter.

Set the multimeter to the continuity setting and touch the probes together to ensure the multimeter is working correctly. Then, disconnect the wires from the float switch and place the probes on the terminals of the switch. If the multimeter beeps, then the switch has continuity, meaning it’s functional. If the multimeter doesn’t beep, then the switch is faulty and needs to be replaced.

Replacing a float switch is a straightforward process that can be completed by most DIY enthusiasts. However, if you’re uncertain or feel uncomfortable performing the task, it’s always best to consult a professional.

In conclusion, checking the float switch is an easy and straightforward way to troubleshoot your Samsung dishwasher. By following these simple steps, you can quickly determine if the switch is faulty and needs to be replaced. Remember to always disconnect power from your dishwasher before attempting any repairs or troubleshooting.

Cleaning the dishwasher filter

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Section: Cleaning the dishwasher filter

Cleaning the dishwasher filter is another easy fix for a Samsung dishwasher that won’t turn on. The filter is responsible for preventing food particles and debris from clogging the dishwasher pump and spray arms.

To clean the filter, start by locating it in your Samsung dishwasher. In most models, it can be found at the bottom of the dishwasher tub, below the lower spray arm.

Once you’ve located the filter, remove it from the dishwasher and rinse it under hot water to remove any debris or food particles trapped inside. If there are stubborn stains or clogs, use a soft brush or toothbrush to gently scrub them away.

After cleaning the filter, replace it back into its original position and ensure it’s securely fitted. A loose filter can cause the dishwasher to malfunction or not turn on.

It’s recommended to clean the dishwasher filter at least once a month to ensure optimal performance. Neglecting to clean it regularly can result in clogs and additional stress on the dishwasher’s pump and motor.

In addition to cleaning the filter, it’s also essential to clean the spray arms and other dishwasher components regularly to prevent clogs and improve overall dishwasher performance.

By cleaning the dishwasher filter, you can resolve some common issues and save yourself from calling a technician. It’s an easy task and takes only a few minutes to complete. Stay tuned for the next section to discover other simple ways to fix your Samsung dishwasher not turning on.

Inspecting the wiring

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Another factor that can disrupt the functioning of your Samsung dishwasher is damaged wiring. So, you might want to check out the wiring connection for any physical damages or malfunctions before you choose to replace the dishwasher.

To inspect the wiring, turn off the dishwasher’s electrical supply and disassemble the door cover. Here are the steps to check the wiring:

Step 1 – Inspect the wiring for damages – Check wires and cords behind the cover for any signs of wear or damage, such as frayed cords or bare wires.

Step 2 – Check the Power Cord – Inspect the dishwasher’s power cord for any physical damages or breaks in the wire. If you find any breaks, replace the cord.

Step 3 – Inspect the Terminal Block – Terminal Block is the place where the power cord gets fastened to the dishwasher. Check the terminal block for any loose connections or signs of damage.

Step 4 – Test the wires for continuity – Use a multimeter to test the wires to make sure they are providing continuity. If the test shows no continuity, it’s time to replace the wiring.

Step 5 – Reassemble the dishwasher – After verifying that all wiring is in good shape, reassemble the dishwasher and turn the power back on.

If you have identified any damaged wires, you’d need to replace them entirely. However, if the issue is with the power cord, it is recommended to have a licensed electrician to replace it.

Inspecting the wiring may seem a challenging task, but it is not that difficult. By following these simple steps, you can quickly identify and fix the issue with your Samsung dishwasher, and have it working smoothly in no time.

Replacing a damaged motor

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

If you hear a humming or buzzing sound when you try to turn on your Samsung dishwasher, it is likely that the motor is damaged. In this case, replacing the motor will be your best bet.

To replace the motor, you will first need to remove the dishwasher from its place. Turn off the power supply and disconnect all the water and electrical connections. Once the dishwasher is out, lay it on a flat surface and remove the bottom panel to gain access to the motor.

To remove the old motor, first unplug all the electrical connections. Then use a wrench to unscrew the mounting bolts that attach the motor to the dishwasher. Carefully remove the motor from the machine and set it aside.

Now, it’s time to install the new motor. Place the new motor in the same position where the old one was. Use the same mounting bolts to secure it to the dishwasher. Then, reattach all the electrical connections.

Before you reinstall the bottom panel, test if the motor is working properly. Turn on the power supply and try to turn on the dishwasher. If the motor is working, you should hear a steady sound, and the dishwasher should start functioning normally.

If everything is functioning as expected, reinstall the bottom panel and reinstall the dishwasher back into place. Finally, reconnect the water and electrical connections.

Replacing a damaged motor may require some technical know-how, but it is a fairly straightforward repair. However, if you are not comfortable working with electrical equipment, we recommend seeking the help of a professional.

Dealing with clogged spray arms

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Dealing with Clogged Spray Arms

One common issue that can prevent your Samsung dishwasher from turning on is clogged spray arms. These are the spinning arms that release water to clean your dishes. Over time, food particles, soap scum, and other debris can accumulate inside the arms, causing them to clog and affect their performance.

Here are some easy steps to deal with clogged spray arms:

1. Remove the bottom rack of your dishwasher to access the spray arms.

2. Locate the spray arms and check for any visible debris or blockages.

3. Use a toothbrush or any soft-bristled brush to scrub away any buildup that you see.

4. If the spray arm is still clogged, remove it from the dishwasher.

5. Run it under warm water to help flush out any remaining debris.

6. Use a straightened paperclip to poke through any holes that appear to be blocked.

7. Once you’ve cleaned the spray arm, reattach it to the dishwasher and run a cycle to test its effectiveness.

8. If the spray arm still doesn’t work, it might be time to replace it.

9. You can purchase a new spray arm directly from Samsung or any authorized retailer.

10. Follow the manufacturer’s instructions to install the new spray arm.

11. Run the dishwasher once again to ensure it is functioning properly.

By following these simple steps to clean or replace your dishwasher’s spray arms, you can easily fix the issue of it not turning on due to clogged spray arms. Doing this maintenance regularly can also help to prevent future clogs and ensure that your Samsung dishwasher continues to work efficiently.

Using vinegar to unclog the dishwasher

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

When a dishwasher is not turning on, there’s a good chance that the appliance is clogged. Most people would resort to using harsh chemicals to unclog the dishwasher, but there’s a more eco-friendly and cost-effective solution – using vinegar.

Vinegar is a natural cleaning agent that’s safe to use on dishes and appliances. It’s also a great way to dissolve stubborn clogs in dishwashers. Here’s how to use vinegar to unclog your dishwasher:

Step 1: Remove debris from the dishwasher

Before you begin, make sure to remove any debris that’s blocking the dishwasher. You can use a spoon or your hands to remove it. Debris includes food particles, pieces of paper, and other solid objects that may have found their way into the dishwasher.

Step 2: Check the dishwasher’s spray arms

Check the spray arms of the dishwasher to make sure nothing is clogging them. Remove any debris that you find and wipe the spray arms with a clean cloth or sponge.

Step 3: Pour vinegar into the dishwasher

Next, pour a cup of vinegar into a dishwasher-safe cup or bowl and place it on the top rack of the appliance. Run the dishwasher on the hottest and longest setting possible.

Step 4: Run the dishwasher again

Once the vinegar cycle is complete, run the dishwasher again to get rid of any remaining debris. This time, do not add any vinegar.

Step 5: Clean the dishwasher’s filter

Finally, remove and clean the dishwasher’s filter. This filter is usually located at the bottom of the appliance. Remove any debris that’s accumulated on the filter and rinse it with warm water.


Using vinegar to unclog a dishwasher is an easy and eco-friendly way to fix the appliance. By following these steps, you can save money and avoid using harsh chemicals that could potentially harm your dishwasher and your health. Give it a try the next time your Samsung dishwasher is not turning on – you’ll be surprised at how effective vinegar can be!

Inspecting the drain hose

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

If your Samsung dishwasher is not turning on, the issue could be with the drain hose. A clogged or kinked hose could prevent the dishwasher from getting the water it needs to function properly. Fortunately, inspecting the drain hose is a relatively easy fix.

Firstly, turn off the power and water supply to your dishwasher. Next, locate the drain hose at the back of the appliance. Carefully remove the hose from the dishwasher and inspect both the inlet and outlet for any clogs or debris. If you find any blockages, clear them out with a long wire or straightened coat hanger.

If the hose appears kinked, it may be restricting water flow. In this case, try straightening it out to see if that solves the problem. If you are unable to straighten it out, consider replacing the hose entirely.

Once you have cleared any clogs or straightened the hose, re-attach the drain hose to the dishwasher and turn the power and water supply back on. Test the dishwasher to see if it is functioning properly.

If the issue persists, it may be a more serious problem and you may need to call in a professional. However, inspecting the drain hose is a simple and often effective fix to get your Samsung dishwasher back up and running.

Replacing the drain pump

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Replacing the drain pump is another easy and straightforward solution for when your Samsung dishwasher is not turning on. The drain pump is responsible for draining the water from the dishwasher after it has completed its wash cycle.

To replace the drain pump, start by turning off the power to the dishwasher and disconnecting it from the power source. Next, locate the drain pump, which is usually located at the bottom of the dishwasher.

Once you have located the drain pump, detach the wires and hoses from the pump. To do this, loosen the clamp that holds the hoses in place and gently remove the hoses from the pump. Be sure to have a towel or bucket nearby to catch any water that may spill out during this process.

After you have removed the wires and hoses from the pump, remove the old pump from the dishwasher. Install the new drain pump in its place and begin reconnecting the wires and hoses. Make sure to secure the hoses in place with the clamp and ensure that the wires are securely attached to the new pump.

Once you have successfully replaced the drain pump, turn on the power supply to the dishwasher and test it to ensure that it is functioning properly. In most cases, this simple and affordable fix will get your Samsung dishwasher back up and running in no time.

Remember, if you are uncomfortable performing any of these steps, it is best to seek the services of a professional technician to avoid damaging your dishwasher. With these easy steps, replacing the drain pump can be a quick and effective solution to a non-functioning Samsung dishwasher.

Cleaning the garbage disposal

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

One potential cause of your Samsung dishwasher not turning on could be a clogged or malfunctioning garbage disposal. If the disposal is not working properly, it can cause a backup of water in the dishwasher and prevent it from functioning.

To clean the garbage disposal, start by turning off the power to the disposal at the main circuit breaker. Next, use a flashlight to inspect the disposal. If you see any large pieces of food or debris, carefully remove them with tongs or pliers.

Once you have removed any visible debris, you can try cleaning the disposal with a mixture of baking soda and vinegar. First, sprinkle one cup of baking soda down the disposal. Then, slowly pour one cup of vinegar down the drain. Allow the mixture to sit for 10 to 15 minutes, then turn on the hot water and run the disposal to flush out any remaining debris.

You can also use a garbage disposal cleaner or deodorizer to help keep your disposal clean and prevent future clogs. Follow the instructions on the package carefully to ensure safe and effective use.

Regular maintenance of your garbage disposal can help prevent issues that can affect your dishwasher, as well as extend the life of your disposal. Some best practices include always running water when using the disposal, avoiding putting large quantities of food down the drain at once, and using ice cubes to sharpen the blades instead of harsh chemicals.

If you have tried cleaning the garbage disposal and your Samsung dishwasher still won’t turn on, it may be necessary to call in a professional plumber or appliance repair technician for further assistance.

Using dishwasher cleaner

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Using dishwasher cleaner is an important step in maintaining the optimal performance of your Samsung dishwasher. Over time, grease, food particles, and soap scum can build up inside the dishwasher causing it to malfunction. Fortunately, there are several dishwasher cleaners that can help you tackle this issue.

When choosing a dishwasher cleaner, ensure that it is suitable for your Samsung dishwasher model and is formulated to dissolve and dislodge tough stains and buildup.

To use the dishwasher cleaner, start by emptying your dishwasher and removing any visible debris from the dishwasher bottom and drain. Then, refer to the dishwasher cleaner manufacturer’s instructions for the right amount of cleaner to use. Generally, it’s best to fill a detergent cup with one pack of dishwasher cleaner, or as directed by the manufacturer.

Next, run a hot water cycle on your dishwasher to dissolve and dislodge any buildup. You can also add a cup of white vinegar during this cycle to boost the cleaning process and neutralize any odors. Remember to use the hottest water setting possible when cleaning your dishwasher with a dishwasher cleaner.

Once the cycle is complete, wipe down the dishwasher door, gasket, and interior with a clean, damp cloth. Avoid using abrasive sponges or cleaners that can damage the interior or leave scratches.

Using a dishwasher cleaner regularly will not only ensure that your Samsung dishwasher stays in optimal condition but also prevent odors and keep your dishes sparkling clean. It’s recommended to use a dishwasher cleaner at least once every three months or more often depending on your usage.

In conclusion, using dishwasher cleaner is a simple yet effective way to keep your Samsung dishwasher running smoothly. By following the manufacturer’s instructions and using hot water, you can effectively dissolve and dislodge buildup from inside your dishwasher. So, don’t let a dirty dishwasher ruin your next family dinner – try using a dishwasher cleaner today.

Common issues with Samsung dishwasher not turning on

Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

Common Issues with Samsung Dishwasher Not Turning On

In today’s fast-paced world, household appliances like dishwashers have become an absolute necessity. Samsung is one of the trusted and renowned brands in the market for dishwashers. However, like any other appliance, Samsung dishwashers can also suffer from operational issues, including the common issue of not turning on.

If you are facing difficulties with your Samsung dishwasher not turning on, there could be various reasons. In this section of the article, we will discuss some of the most common issues that can cause your Samsung dishwasher to not turn on.

1. Power Supply

Before you dive into the nitty-gritty details of your dishwasher’s components, check your power supply. Often, the power supply can become loose or unplugged. Ensure that the power cord is securely plugged in and the outlet is working correctly.

2. Door Latch

The latch on the dishwasher door can prove to be another culprit for the dishwasher not turning on. If the latch is faulty or not engaging correctly, the dishwasher may not power on. To check if this is the issue, try toggling the latch a few times to ensure it is tightly locked.

3. Control Board

If the dishwasher still isn’t turning on, the control board could have malfunctioned. The control board regulates all aspects of the dishwasher’s operation, and its failure can lead to the dishwasher not responding to the start-up command. A control board failure indicates a need for professional intervention to replace the damaged control board.

4. Fuse

Dishwashers, like many other household appliances, have an internal safety fuse to prevent electrical damage in case of any power surges. In case the fuse blows, the dishwasher may not turn on. Ensure that the fuse is not damaged or burnt and replace it with a new one if necessary.

5. Thermal Fuse

Apart from the safety fuse, dishwashers also have a thermal fuse as a safety measure. Thermal fuses cut off the power supply to the dishwasher to prevent electrical damage in case of overheating. If the dishwasher is not turning on, it is possible that the thermal fuse has blown or has reached its temperature limit. A technician can replace it with a new thermal fuse.

6. Control Panel

The control panel can often be the source of dishwasher malfunctions, including not turning on. Make sure all the control buttons are free of debris and firmly pressing the buttons, and try toggling them a few times to rule out the issue.

Wrapping Up

These are some of the most common issues that can cause a Samsung dishwasher not to turn on. While some of these issues can be fixed by simple troubleshooting, others may require professional intervention. Knowing the issue and the possible solutions can save you time, money, and undue stress, making your dishwashing experience hassle-free.


Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

In conclusion, a Samsung dishwasher not turning on can be a frustrating experience for any homeowner. However, with the simple troubleshooting solutions we have provided, you can quickly fix the issue on your own without having to call in a professional.

Taking a systematic approach, beginning with checking the power source and ending with cleaning the dishwasher, can help you isolate the problem and fix it in no time.

Remember to always unplug the dishwasher before attempting any repairs, and if you are not comfortable with DIY repairs, seek help from a professional technician.

By following the steps outlined in this guide, you will not only save time and money but also extend the life of your Samsung dishwasher. Happy troubleshooting!


Samsung Dishwasher Not Turning On: 11 Easy Ways To Fix It

As a home improvement enthusiast and expert, I have compiled a list of reliable sources that can help you troubleshoot your Samsung dishwasher. Here are some valuable resources that you can turn to for assistance:

1. Samsung’s Official Support Page

The first place to look for help with your Samsung dishwasher is the official Samsung support page. The website provides comprehensive troubleshooting guides and videos that can help you diagnose and fixing the problem yourself.

2. User Manuals

If you have misplaced or lost your user manual, don’t worry. You can easily find a digital copy of the manual on Samsung’s support page. The manual provides detailed instructions on using, maintaining, and troubleshooting your Samsung dishwasher.

3. DIY Repair Websites

There are several online DIY repair websites that provide valuable information on fixing common household appliances, including dishwashers. Websites like Repair Clinic, The Spruce, and HomeTips offer detailed guides, video tutorials, and forums where you can ask questions and get advice from experts.

4. YouTube Tutorials

YouTube is a great source for visual learners. There are several informative and easy-to-follow video tutorials available on the platform that can help you troubleshoot your Samsung dishwasher. Make sure to watch videos from reputable channels and check the comments section for feedback and additional tips.

5. Samsung Customer Service

If all else fails, you can always reach out to Samsung’s customer service team for assistance. The support team is knowledgeable and helpful and can guide you through the troubleshooting process or help you schedule a repair appointment if needed.

In conclusion, these sources can provide valuable assistance in fixing your Samsung dishwasher. Always make sure to research and consult reliable sources before attempting any repairs. Safety should always come first, and if you’re unsure or uncomfortable with the troubleshooting process, don’t hesitate to seek professional help.

Leave a Comment