Introduction
Microwaves are an indispensable part of modern kitchens, offering a quick and convenient way to prepare meals. However, a common problem that many homeowners encounter is a microwave that keeps blowing fuses. A blown fuse can be frustrating, especially if it happens frequently. Fortunately, there are many easy ways to fix this issue and get your microwave back up and running in no time.
In this article, we’ll explore six of the most effective ways to fix a microwave that keeps blowing fuses. These tips come from years of experience in home improvement and expert knowledge of microwave repair. Whether you’re a DIY enthusiast or just looking for a quick fix, these solutions will help you get your microwave working again.
So, if you’re tired of dealing with blown fuses and want to get your microwave back in top condition, read on to learn more!
Why Does Microwave Keep Blowing Fuse?
When it comes to troubleshooting a microwave that keeps blowing a fuse, there are a few different factors that could be at play.
One common cause is simply an overloaded circuit. If your microwave is sharing an outlet with other appliances or electronics, it may be pulling too much power for the circuit to handle. In this case, the solution is simple: move the microwave to a dedicated outlet, or unplug other devices when you’re using it.
Another possible culprit is a malfunctioning door switch. If the switch fails to engage properly, the microwave won’t turn on at all – or it may turn on and immediately blow the fuse. Check the door switch carefully for any signs of damage, or replace it entirely to see if that resolves the issue.
A third possibility is a short circuit, which occurs when two wires make contact that shouldn’t. This can happen due to damage or wear and tear on the wiring within the microwave itself. If you suspect a short circuit may be to blame, it’s best to leave the repair work to a professional, as it can be dangerous to attempt on your own.
Lastly, it’s possible that you’re simply using a fuse that can’t handle the power your microwave requires. Check the wattage requirements for your microwave, and make sure that you’re using the correct fuse to match. Under-fusing your microwave can be dangerous, so make sure you’re not compromising on safety in the name of saving a few cents.
Overall, the key to fixing a microwave that keeps blowing a fuse is to get to the root of the problem. Identifying what’s causing the issue will help you find the solution that works best for you.
Safety Precautions
Before diving into the potential fixes for your microwave, it is important to take safety precautions to avoid any accidents or injuries.
The first step is to unplug the microwave from the power source. This will prevent any electrical shock or damage to the appliance while working on it. You should also make sure to ground yourself by using a grounded wrist strap or by holding onto a metal surface. This will prevent any static electricity from damaging the electronic components.
Another important precaution is to avoid touching any of the interior components of the microwave without protective gloves. The capacitor in the microwave can store electricity even when the appliance is unplugged, which can be dangerous if touched without proper protection.
It is also important to avoid using any metal tools or utensils while working on the microwave as they can conduct electricity, potentially causing a severe shock. Instead, use plastic or wooden tools to avoid any accidents.
Additionally, make sure to thoroughly read the owner’s manual before attempting any repairs. It may provide specific safety instructions for your microwave model.
If you are unsure about any safety procedures, it is recommended to consult a professional technician to avoid any accidents or injuries. Taking the necessary precautions can ensure a safe and successful microwave repair.
Tools and Materials Required
Before tackling any repair or maintenance task, it is essential to ensure that you have all the necessary tools and materials. To fix your microwave that is blowing a fuse, you will need:
1. A multimeter: A multimeter is a tool that measures voltage, resistance, and current. It’s the number one tool you need to diagnose and repair your microwave.
2. Screwdriver: You will need a Phillips and Flat screwdriver for opening up your microwave, and for removing and replacing damaged parts.
3. Electrical Circuit Tester: A circuit tester will help in detecting if there are voltage issues.
4. Replacement Fuses: In case your microwave fuse needs replacement, ensure that you have the exact type of fuse it needs. Fuses come in different amperages, and getting the wrong type can result in further damage to your microwave.
5. Electrical Tape/ Heat shrink tubing: Once you have completed repairing your microwave, you will need electrical tape or heat shrink tubing to cover exposed wires.
6. Gloves and Safety Goggles: Protective gear is necessary when working with electrical appliances that could pose a risk of electrocution or other safety hazards.
Having these tools and materials ready for the job will make it easier and faster to carry out the repair task. It’s also advisable to read the appliance owner’s manual for specific details and safety precautions relating to your particular brand of microwave. Once you have made sure you have all the tools and materials in place, proceed to the next section which outlines six easy ways to fix a microwave that keeps blowing a fuse.
Method 1: Check the Door Switches
When it comes to fixing your microwave, the first step is to troubleshoot the issue. If your microwave keeps blowing its fuse, it’s important to determine the root cause of the problem. One possible cause could be an issue with the door switches.
The door switches of your microwave are designed to prevent the appliance from operating if the door is not fully closed. If these switches are faulty or damaged, your microwave may fail to turn on or operate properly. In some cases, this can even lead to your microwave blowing its fuse.
So, to check if the door switches are the cause of the problem, follow these simple steps:
Step 1: Unplug the Microwave
Before you begin any repair work on your microwave, make sure to unplug it from the electrical outlet. This will help to ensure your safety and prevent any potential damage to the appliance.
Step 2: Locate the Door Switches
The door switches of your microwave are usually located behind the control panel. To access them, you may need to remove the control panel and the cover that protects the switches.
Step 3: Test the Switches
Using a multimeter, test each of the door switches to see if they are functioning properly. To do this, set your multimeter to the “Ohms” setting and place one probe on each terminal of the switch. With the door open, the switch should exhibit an “Open” reading, indicating that the circuit is broken. With the door closed, the switch should show a “Closed” reading, indicating that the circuit is complete.
Step 4: Replace Faulty Switches
If any of the door switches are found to be faulty or damaged, they will need to be replaced. Fortunately, replacing door switches is a relatively easy and inexpensive DIY project. Simply order replacement switches online or from a local appliance parts supplier and follow the manufacturer’s instructions to install them.
Checking the door switches of your microwave is a simple yet effective way to diagnose and fix problems with your appliance. By following these easy steps, you can easily troubleshoot any issues you may be experiencing and get your microwave running smoothly once again.
Method 2: Inspect the High Voltage Capacitor
Another common cause of a microwave blowing a fuse is a damaged high voltage capacitor. This component stores electricity that is used to power the microwave’s magnetron, and a faulty capacitor can cause erratic voltage spikes that can blow fuses or even damage other vital parts of the microwave.
To inspect the high voltage capacitor, you will need to locate it inside the microwave. In most models, it is found near the magnetron and looks like a cylindrical or rectangular-shaped metallic object with several wires connected to it.
Before touching any components inside the microwave, make sure that it is unplugged and that you have discharged the capacitor to avoid any electrical shocks. Once you have done this, you can test the capacitor by using a multimeter to check for continuity.
To do this, set the multimeter to the capacitance setting and place the leads on the capacitor’s terminals. A healthy capacitor should show a gradual increase in the reading, while a damaged one will show no increase or a sudden jump in the multimeter reading. If your capacitor is faulty, you will need to replace it with a new one.
To replace the high voltage capacitor, you will need to remove the microwave’s outer case, and then discharge the capacitor by shorting out its terminals. After that, you can remove the old capacitor and install the new one in its place, being careful to ensure that all the wires are correctly connected.
In conclusion, a faulty high voltage capacitor can cause your microwave to blow fuses or even fail altogether. By learning how to inspect and replace this component, you can save yourself a lot of money and frustration. Just remember to take all the necessary safety precautions when working with electrical components and always consult your microwave’s manual before attempting any repairs.
Method 3: Examine the High Voltage Diode
If your microwave keeps blowing fuses, the culprit might be a faulty high voltage diode. This small but essential component plays a crucial role in converting the electrical current from the transformer into the high voltage needed to power the magnetron.
Here’s how to examine the high voltage diode and determine if it’s causing your microwave to blow fuses:
Step 1: Disconnect the power supply. Before you begin any repair work on your microwave, always disconnect it from the power supply to avoid any risk of electric shock.
Step 2: Locate the high voltage diode. Look for a small, cylindrical metal component with two wires attached to it. It should be located near the magnetron and capacitor.
Step 3: Test the diode. Use a multimeter to test the diode for continuity. Set the multimeter to the “diode check” or “ohms” setting.
Step 4: Check the readings. Touch the positive and negative probes of the multimeter to the two ends of the diode. You should see a reading of 50 to 200 ohms in one direction, and infinite resistance in the other direction.
Step 5: If the readings differ, replace the diode. If the readings you get from the multimeter don’t match these ranges, it means the diode is faulty and needs to be replaced. You can easily find a replacement diode at your local electronics store or online.
In conclusion, examining the high voltage diode is an easy and effective way to diagnose and fix a microwave that keeps blowing fuses. By following these simple steps, you can identify and replace a faulty diode and keep your microwave running smoothly.
Method 4: Test the Magnetron
If you have run through all the previous methods and your microwave is still blowing fuses, it’s time to take a closer look at the magnetron – the component that produces the heat for your food.
To test the magnetron, you will need a multimeter. This tool measures electrical current and can help you determine if the magnetron is faulty.
First, unplug your microwave and locate the magnetron. It is usually located behind the control panel of the microwave.
Next, detach the magnetron from the microwave and disconnect the two wires that connect it to the high voltage transformer. Set your multimeter to measure resistance and check the resistance between the two magnetron terminals. Most magnetrons should have a resistance reading between 4-7 ohms.
If your magnetron’s resistance reading is significantly higher or lower than this range, then it is likely faulty and needs to be replaced. You can also perform a continuity test to see if there is a break in the circuit. If there is a break, the magnetron also needs to be replaced.
You can purchase a replacement magnetron online or from a local appliance repair shop. Always ensure you purchase the correct magnetron for your specific microwave model.
Replacing the magnetron can be a challenging task as it requires disassembling part of the microwave. Consider hiring a professional to replace the magnetron if you’re not comfortable doing it yourself.
In conclusion, testing the magnetron for faults is an essential step in fixing a microwave that keeps blowing fuses. With the help of a multimeter, you can easily identify if the magnetron is faulty and needs to be replaced.
Method 5: Check the Thermal Cutoffs or Thermostat
One of the main culprits of a microwave that keeps blowing a fuse is a faulty thermal cutoff or thermostat. These components are designed to shut off the microwave in case of overheating, preventing a potentially dangerous fire hazard. However, they can also malfunction and cause the microwave to keep blowing fuses.
To check the thermal cutoffs or thermostat, you’ll need to open the microwave and access the internal components. This requires a bit of technical skill and caution, as microwaves contain high voltage parts that can be dangerous if mishandled. If you’re not comfortable with this, it’s best to call a professional technician.
Assuming you’re confident with DIY microwave repair, here are the steps to check the thermal cutoffs or thermostat:
Step 1: Unplug the microwave and remove the outer casing. This usually involves unscrewing screws or clips around the edges.
Step 2: Locate the thermal cutoffs and thermostat, which are small cylindrical devices attached to the side of the microwave cavity. They are usually orange or red in color and have two wires connected to them.
Step 3: Use a multimeter to test the continuity of each component. Set the multimeter to the resistance or continuity mode and touch one probe to each of the component’s terminals. If you get a reading of zero or very low resistance, the component is working properly. If you get an infinite reading, the component is faulty and needs to be replaced.
Step 4: If you find a faulty thermal cutoff or thermostat, you’ll need to replace it. You can order a replacement part online or from a local appliance store, and install it by disconnecting the old component’s wires and attaching the new one in its place.
Step 5: Reassemble the microwave and plug it in. Test it by operating it for a few minutes and checking if it blows a fuse again. If not, your thermal cutoffs and thermostat are likely the fix you needed.
By checking the thermal cutoffs and thermostat in your microwave, you can eliminate another possible cause of the fuse blowing. However, if none of these tips have fixed your problem, it’s time to call in a professional microwave repair technician. They will have the knowledge and expertise to diagnose and fix the issue safely and effectively.
Method 6: Replace the Fuse Holder
If none of the previous methods worked, it might be time to replace the fuse holder. Over time, the fuse holder can become worn and damaged, causing it to fail. Luckily, replacing it is a simple task and can be done within minutes.
The first step is to locate the fuse holder. This can be done by referring to the owner’s manual or by searching for it on the microwave. Once you have located the fuse holder, gently remove it from the microwave, taking care not to damage any of the surrounding components.
Next, you will need to purchase a replacement fuse holder. Most hardware stores will carry these, but if you are having trouble finding one, you can always order it online.
Once you have your replacement fuse holder, it’s time to install it. Start by gently inserting the new fuse holder into the opening where the old one was. Make sure it is securely in place and that there are no loose wires.
Finally, it’s time to test the microwave. Turn it on and see if the fuse blows again. If it does, there may be a larger underlying issue with the microwave that needs to be addressed. If it doesn’t, congratulations! You have successfully fixed your microwave.
In conclusion, a blown fuse in your microwave can be a frustrating problem. But with these six easy methods, you can fix the issue and get your microwave back up and running in no time. Remember to always practice safety when working with electrical components, and if you are unsure about any of these methods, don’t hesitate to call a professional. Happy microwaving!
Additional Fix: Replace the Fuse
If none of the above fixes have solved the problem, it’s time to check the fuse. A microwave fuse is a safety device that protects the electronic components of the microwave from power surges. If the fuse is blown, the microwave won’t turn on at all.
Replacing a microwave fuse is relatively easy, but you need to follow a few safety precautions. Before you start, unplug the microwave from the power outlet and wait for at least 10 minutes to allow any residual electrical charge to dissipate.
To access the fuse, you’ll need to remove the outer cover of the microwave. Most microwaves have screws or clips that hold the cover in place. Refer to the owner’s manual or search online for instructions on how to remove the cover for your specific model.
Once you’ve removed the cover, you should be able to locate the fuse. It’s a small, cylindrical device with metal caps on each end. Carefully remove the fuse by gently pulling it out of its socket. Use a multimeter to test the fuse for continuity. If the multimeter shows that the fuse is open, it’s time to replace it.
Microwave fuses are widely available at hardware stores and online retailers. Make sure you get the right type and rating of fuse for your microwave. The rating is usually printed on the old fuse or in the owner’s manual.
Insert the new fuse into the socket and replace the cover. Plug the microwave back in and test it to make sure it’s working properly. If the fuse blows again, the problem may be with the power supply or the electronic components of the microwave. In that case, it’s best to call a professional for help.
Replacing a blown fuse is a straightforward fix that can save you money on professional repairs. Just be sure to follow the safety precautions and get the right replacement fuse for your microwave.
Common Mistakes and Avoiding Them
When dealing with a microwave that keeps blowing a fuse, it’s important to identify and avoid common mistakes that can exacerbate the problem. Here are some things to keep in mind:
1. Overloading the microwave: Overloading the microwave can put undue strain on its internal components, leading to blown fuses. Always ensure that the microwave is used within its recommended capacity.
2. Using the wrong kind of containers: Not all containers are microwave-safe, and using the wrong kind of container can cause the microwave to short-circuit and blow a fuse. Make sure to use only microwave-safe containers when heating or cooking food.
3. Neglecting to clean the microwave: A buildup of food debris, grease, and other contaminants inside the microwave can cause it to malfunction, leading to blown fuses. Make sure to clean the microwave regularly to prevent this.
4. Ignoring warning signs: If the microwave starts making strange noises, giving off unusual odors, or exhibiting other warning signs, it’s important to address these issues promptly to avoid blown fuses. Ignoring these warning signs can make the problem worse.
5. Using the microwave without supervision: It’s never a good idea to use the microwave without supervision, as this can lead to accidents and blown fuses. Always keep an eye on the microwave when it’s in use, and never leave it unattended.
By avoiding these common mistakes and taking steps to maintain your microwave properly, you can reduce the risk of blown fuses and keep your microwave working optimally for years to come.
When to Call a Professional Microwave Repairer
While it’s possible to troubleshoot and fix a blowing fuse issue on your own, there could be instances where you might need to call in a professional microwave repairer.
If you’ve already tried the methods outlined in the previous sections but are still experiencing the same problem, it may be time to call in an expert. Additionally, if you’re uncomfortable working with electrical components or are unsure about what you’re doing, it’s best to seek professional help.
A professional microwave repairer will not only have the experience necessary to diagnose the problem but also have the specialized tools and equipment required to fix it correctly. Attempting to fix the microwave on your own without the proper knowledge and gear can result in further damage, which could end up costing you more in the long run.
Furthermore, if your microwave is still under warranty, attempting to fix the problem on your own may void the warranty altogether. So, it’s safer to call in a professional in such cases.
In summary, here are some instances when calling for professional help is necessary:
1. If you’ve already tried the DIY methods and the microwave is still blowing a fuse
2. If you are not comfortable working with electrical components and don’t have the necessary knowledge
3. If the microwave is still under warranty
4. If you’re unsure about what you’re doing and don’t want to risk further damage
In conclusion, knowing when it’s time to call in a professional microwave repairer can save you time, money, and more importantly, ensure your safety. So, be wise and seek help when necessary.
Tips for Proper Maintenance of Your Microwave
Microwaves are one of the most convenient kitchen appliances that we rely on every day. However, like any other appliance, they require proper maintenance to function efficiently. Neglecting your microwave can lead to a variety of issues, such as blowing a fuse or even a fire hazard. Here are some tips to help maintain your microwave and prolong its lifespan.
Clean your microwave regularly: This is one of the most obvious but often overlooked maintenance tips. Splatters, spills, and general build-up inside your microwave can cause damage or even short circuits. Make sure to wipe your microwave with a damp cloth after every use.
Use microwave-safe containers: Microwaves are designed to heat food, not containers. Using the wrong type of container can cause damage to your microwave or even start a fire. Stick to microwave-safe containers made of glass, ceramic, or microwaveable plastic.
Avoid metal in the microwave: Metal reflects microwaves, causing them to bounce back and forth in the microwave instead of heating up the food. This can damage the magnetron inside the microwave and cause it to blow a fuse. Never put metal in your microwave.
Check for wear and tear: Over time, the interior of your microwave can become damaged, and the door seal may become worn. If you notice any cracks, burns, or warped areas, it’s time to replace your microwave.
Do not run your microwave empty: Running your microwave empty can cause it to overheat and cause damage to the appliance. Always put something in the microwave to absorb the microwaves.
Take care of the door latch and hinges: The door latch and hinges on your microwave can experience wear and tear, especially if you are constantly opening and closing the door. Make sure to clean and inspect these parts regularly to ensure they are in good shape.
In conclusion, proper maintenance is key to keeping your microwave in good working order. By following these simple tips, you can prolong the life of your appliance and avoid costly repairs or replacements in the future. Remember to always use your microwave as intended, and if you notice any issues, address them promptly to prevent further damage.
FAQs
FAQs:
Q: Why does my microwave keep blowing fuses?
A: There could be several reasons for this to happen, including a faulty circuit or a defective component. It’s important to first rule out any issues with the electrical supply by checking the outlet and power cord. If those seem to be fine, then the problem may lie with the microwave itself.
Q: What should I do if the microwave keeps blowing fuses?
A: If your microwave keeps blowing fuses, it’s important to stop using it immediately and seek assistance from a professional. Continuing to use a faulty microwave can be dangerous and even cause damage to your home or property.
Q: Can I fix a fuse that keeps blowing on my own?
A: It’s not recommended to attempt to fix a fuse on your own, especially if you don’t have experience working with electrical components. In most cases, it’s best to seek assistance from a professional electrician or appliance repair technician.
Q: Is it safe to continue using a microwave that keeps blowing fuses?
A: No, it’s not safe to continue using a microwave that keeps blowing fuses. This can be a sign of a serious issue with the appliance, and there’s a risk of causing further damage or even starting a fire.
Q: How can I prevent my microwave from blowing fuses in the future?
A: One way to prevent your microwave from blowing fuses is to make sure it’s plugged into an outlet that’s rated for its wattage. You should also avoid overloading the microwave with too many items, as this can cause it to draw too much power and blow a fuse. Additionally, regular maintenance and cleaning can help keep your microwave in good working order, which can prolong its lifespan and prevent issues from arising.
Conclusion
After following the six easy solutions we’ve mentioned in this article, you should be able to fix your microwave that keeps blowing a fuse without seeking professional help. Remember, the safety precautions you need to take when dealing with electrical appliances because any electric shock can be hazardous and even fatal.
It is crucial to examine your microwave thoroughly before attempting to fix it and attempting to do so if you lack technical prowess can lead to further damage to your device and, even worse, to injury or fire. In some cases, it may be a practical choice to discard your microwave and purchase a new one, particularly if it is outdated or beyond repair.
To avoid experiencing the same problem soon, ensure that your microwave is well-maintained and utilized properly and that you don’t exceed the wattage requirements for specific foods. Also, only use approved and genuine replacement parts for your microwave.
In conclusion, solving your “microwave keeps blowing fuse” issue is not rocket science. By following the tips, tricks, and instructions we’ve outlined, you’ll be able to repair your microwave in no time without endangering yourself or others. Don’t forget that if you’re not confident with your skills, you can always call an expert to help you fix the problem. Happy cooking!
References
Throughout this article, we have provided useful and practical tips to help you fix your microwave when it keeps blowing fuses. However, it’s important to note that microwaves are complex appliances, and sometimes fixing them requires professional maintenance.
If you have attempted all the troubleshooting tips we’ve shared, but your microwave still isn’t working correctly, don’t hesitate to call a professional technician to take a look. Attempting to fix a faulty microwave without the right skills and knowledge can be dangerous and may cause irreparable damage to the appliance.
Here are a few resources you can turn to for additional information on DIY microwave repairs, appliance maintenance, and troubleshooting:
1. Owner’s Manual – Every new microwave comes with an owner’s manual that contains information about maintenance, troubleshooting, and repair. If you don’t have your manual, you can generally find an online version by searching the model number.
2. YouTube – There are countless DIY repair videos on YouTube that can help you troubleshoot your microwave problems with visual aids. While these videos can be helpful, they should be taken with a grain of salt, as not every repair process is the same, and some can be dangerous.
3. Appliance Forums – Joining an online appliance forum dedicated to microwaves can be a great place to look for answers. You can post your questions, ask for advice, and connect with other DIY enthusiasts who have experience fixing similar problems.
4. Professional Technicians – If you are not confident in troubleshooting and repairing your microwave on your own, or your issue isn’t addressed in the resources above, it’s best to contact a professional technician, who can diagnose and fix the problem safely and effectively.
By keeping the above-mentioned resources in mind, you’ll have plenty of information and references to help you troubleshoot your microwave and keep it running as good as new.
Author Bio
As a home improvement enthusiast and expert with years of experience, I have seen and fixed all kinds of household problems. My fascination with DIY solutions began when I started renovating my own home and discovered that simple fixes can save a lot of money and time. Since then, I have been busy refurbishing and redecorating homes, helping people troubleshoot household problems, and sharing my knowledge with others through my blog and articles.
Over the years, I have encountered many situations where a simple appliance malfunction can turn into a big headache. The microwave is one such appliance that is used in almost every kitchen and can cause frustration when it stops working correctly. One common problem people often face is when the microwave keeps blowing the fuse. Fortunately, I have a few easy solutions that can save you from expensive repairs or replacements.
In this article, I will show you simple ways to troubleshoot your microwave that keeps blowing the fuse. These solutions are easy to follow and will help you make your microwave work like new in no time. So, if you’re ready to get your kitchen back up and running, keep reading!
Share This Article
If you found this article helpful in solving your microwave fuse blowing woes, please share it with your friends and family. By doing so, you can help others overcome their microwave malfunctioning troubles without incurring costly repair bills.
You can easily share this article on social media platforms such as Facebook and Twitter. You can also send the link to your community members, colleagues, and relatives via email or messaging apps.
Remember, sharing is caring, and by sharing this article, you can help the people around you save time, money, and effort in fixing their microwave issues.
Additionally, if you have any questions, concerns, or suggestions regarding the tips mentioned in this article, please do not hesitate to reach out to us in the comments section below. We value your feedback and appreciate your engagement.”
By sharing this article, you can spread awareness about the importance of regular maintenance and DIY repairs in keeping your home appliances in top-notch working condition. So, go ahead and share this article now to help others troubleshoot their microwave problems and live a hassle-free life.
Comments and Feedback
As a home improvement enthusiast and expert, I know that there can be multiple reasons why a microwave keeps blowing a fuse. It is no surprise that many homeowners have experienced this issue, and some have found it difficult to fix. After trying out the six easy ways to fix the fuse, provided in this article, feel free to share your feedback.
We appreciate your comments, suggestions, and concerns. If you have any questions about the steps outlined in this article, do not hesitate to ask. We pride ourselves on providing reliable and practical solutions to common household problems.
If you have tried the six easy ways to fix the fuse, let us know which method worked for you. Your feedback can help other homeowners who may be experiencing the same problem. Our aim is to ensure that your microwave is functional and safe to use.
In conclusion, fixing a microwave that keeps blowing a fuse is not a daunting task if you know what to do. We hope that this article has been of great help to you and that you can now enjoy using your microwave without the fear of it blowing a fuse.
Thank you for taking the time to read our article. We appreciate your support and look forward to hearing from you.