Introduction
As a homeowner, you know the importance of having functioning appliances that make your daily chores easier. One of the most used appliances in any household is the washing machine, and the LG brand is one of the most popular in the market. However, what happens when your LG washer suddenly stops spinning? This frustrating issue can be caused by a variety of factors, but the good news is that most of them can be easily fixed.
In this article, we will go over eight ways to troubleshoot and fix your LG washer when it’s not spinning. Whether you are a seasoned DIY enthusiast or a beginner, these tips will help you quickly and efficiently solve the problem, without having to call a professional repair service.
Before we dive into the solutions, it’s important to understand why your LG washer may not be spinning. Some possible causes include a malfunctioning motor, a problem with the belt or pulley, a clogged drain pump, or an issue with the door latch or lid switch. By identifying the root cause, you can save yourself time and effort in resolving the problem.
Don’t worry, you don’t have to be an expert to tackle these issues. With the tips in this article, you’ll be able to get your LG washer spinning again in no time. So, let’s get started!
Common causes of LG Washer Not Spinning
If your LG washer is not spinning, there could be a number of reasons as to why it is happening. The good news is that in most cases, fixing the issue is not very complicated and can be done without professional help. Here are some common causes of LG washer not spinning that you should be aware of:
1. Obstruction in the Drain Pump
One of the most common reasons why a LG washer might not be spinning is because there is an obstruction in the drain pump. The pump is responsible for draining water out of the machine and when there is a blockage, it can prevent the washer from spinning properly. Cleaning out the drain pump is the easiest way to fix this issue.
2. Damaged Drive Belt
Another common issue that can cause a LG washer to stop spinning is a damaged drive belt. The drive belt connects the motor to the drum and when it is damaged or stretched, it can prevent proper spinning. In this case, you will need to replace the drive belt.
3. Broken Motor Coupler
A broken motor coupler is also a common cause of a LG washer not spinning. The motor coupler connects the motor to the transmission and when it is broken, the motor cannot engage with the transmission to create the spinning motion. You will need to replace the motor coupler to fix this issue.
4. Faulty Motor
A faulty motor can also cause the LG washer to stop spinning. If the motor is not working properly, it cannot engage with the transmission or drum to create the necessary spinning motion. In this case, you will need to replace the motor.
5. Clogged Filters
Clogged filters can also be the reason behind a LG washer not spinning. The filters prevent debris from entering the washer’s components, but when they become clogged, they can prevent proper spinning. Cleaning the filters is the easiest way to fix this issue.
6. Malfunctioning Latch
If the door latch is malfunctioning, the LG washer may not spin properly. The door latch helps to secure the washer during the spin cycle. If it is not working properly, it can prevent the washer from spinning. You will need to replace the door latch to fix this issue.
7. Faulty Pressure Switch
The pressure switch is responsible for controlling the water level in the washer. If it is faulty, it can prevent the washer from spinning properly. Replacing the pressure switch can help resolve this issue.
8. Sensor Issues
Finally, the sensor that controls the spinning motion may be malfunctioning. If the sensor is not working properly, it may not be sending the right signals to the washer’s components, causing it to stop spinning. In this case, you will need to replace the sensor.
Check the power source
Section 1: Check the Power Source
When you encounter issues with your LG washer not spinning, the first thing to check is the power source of the machine. More often than not, a faulty power source could be the culprit behind the issue. Here are some ways to troubleshoot the power source:
1. Check the Outlet:
Before diving deep into the machine’s mechanics, try plugging another appliance like a toaster or a lamp into the outlet where your washer is usually plugged in. If the alternative appliance also doesn’t work, then the problem may be with the outlet, not the washer.
2. Check the Circuit Breaker:
If the outlet seems to be functioning correctly, head to your home’s main electrical panel and verify whether the circuit breaker associated with the washer has not tripped. If it has, reset it by flipping it back on.
3. Check for Loose Wires:
Inspect the power cord connected to your washer and make sure it’s secure and vital. The cable should be firmly attached to the washer at one end and the outlet at the other. Additionally, ensure that there’s no cut or tear in the wire that may impede the electricity flowing into the machine.
4. Check the Voltage:
Ensure that your washer is receiving the standard voltage of 120 volts. If the voltage is below the suggested level, your washer may not spin. You can test the voltage at the outlet by using a voltage tester.
After thoroughly inspecting and troubleshooting the power source, if the problem still persists, it may be an issue with the machine’s mechanical components. In the next section, we will go over some additional troubleshooting steps.
Inspect the lid switch
Inspect the Lid Switch:
Another possible cause for your LG washer not spinning could be a faulty lid switch. This switch acts as a safety mechanism to prevent the washer from spinning if the lid is open. However, sometimes the switch can become damaged or worn out, preventing it from functioning properly. Luckily, it’s easy to inspect the lid switch and fix the issue if this is the culprit.
First, unplug your washer and locate the lid switch. You’ll typically find it near the door hinge, and it will look like a small rectangular or circular part. Check the switch for any visible damage or wear and tear. If it looks damaged, it’s time to replace it. However, if it appears to be in good condition, you can test it with a multimeter to ensure it’s functioning correctly.
To test the switch, set your multimeter to the ohm reading function. Touch the two probes to the switch terminals, and you should see a reading of zero if the switch is working properly. If the reading is higher than zero, the switch is faulty and needs to be replaced.
Replacing a lid switch is relatively easy and can be done by following the manufacturer’s instructions included with the replacement part. If you’re unsure about replacing it yourself, it’s always best to contact a professional.
By inspecting and testing the lid switch, you can easily determine whether it’s the cause of your LG washer not spinning and take the necessary steps to fix it.
Examine the drive belt
The drive belt is an essential component of your LG washer that is responsible for turning the tub during the spin cycle. If the belt is broken or loose, your washer won’t spin correctly. The drive belt can become worn over time, causing it to slip or break. If this is the issue, it’s relatively easy to replace. Here’s what you need to do:
Step 1: Unplug the washer from the power outlet and turn off the water supply.
Step 2: Locate the drive belt at the back of the washer. Remove the access panel to get to the drive belt.
Step 3: Inspect the belt for any signs of wear and tear. If it is frayed, loose or broken, it’s time to replace it.
Step 4: Remove the old belt by loosening the tension on the motor and sliding the belt off the pulley.
Step 5: Install the new belt by wrapping it around the pulley and gently pulling the tensioner towards the motor, increasing the tension on the belt.
Step 6: Turn the tub by hand to ensure that the belt is properly aligned and seated in the grooves of the pulley.
Step 7: Reattach the access panel and plug in the washer.
Step 8: Run a spin cycle to see if the issue has been resolved.
If you are not comfortable replacing the drive belt yourself, it’s best to contact a qualified technician to do the job. However, this is a relatively easy fix for those who have a bit of DIY knowledge and experience under their belt. Remember to always unplug your washer and turn off the water supply before attempting any repairs.
Inspect the motor capacitor
The motor capacitor is the part of the washing machine that provides the necessary power to the motor and controls its speed. When the LG washer is not spinning, it’s possible the motor capacitor has failed. Inspecting the motor capacitor is one of the easiest ways to diagnose the issue at hand.
Before inspecting the motor capacitor, it is essential to turn off the power to the washing machine and unplug it from the main supply. This step is necessary to prevent any electrical accidents that could occur during the inspection process.
The motor capacitor is usually located near the motor, within the control panel of the washing machine. It’s possible to distinguish it from other parts by its cylindrical shape, and it connects to the motor using two wires.
Check the motor capacitor for any physical damage or signs of swelling, leakage, or burning. Any of these signs indicate that the motor capacitor is faulty and needs replacement.
If there are no visible signs of damage, use a multimeter to check if the capacitor is functioning correctly. Using the multimeter, first, discharge the capacitor by shorting its contacts with a screwdriver. Then, set the multimeter to the capacitance mode and check if the capacitor’s reading is within the manufacturer’s specifications. A reading that is lower or higher than the manufacturer’s specifications indicates that the capacitor is faulty and needs replacement.
In conclusion, inspecting the motor capacitor is an easy and essential method to diagnose the LG washer’s not spinning issue. Regular inspection of the motor capacitor is also necessary to monitor its condition and prevent any electrical accidents. When replacing the motor capacitor, ensure to replace it with a capacitor that matches the manufacturer’s specifications.
Check the clutch assembly
Another potential reason why your LG washer may not be spinning is due to issues with the clutch assembly. The clutch assembly plays a crucial role in the washer’s ability to cycle through the various modes, including the spin cycle. If there are issues with the clutch assembly, it can negatively impact the washer’s performance.
Here are some steps to check the clutch assembly on your LG washer:
Step 1 – Safety First
Before you begin, make sure to unplug the washer and turn off its water supply. This will ensure your safety during the inspection and repair process.
Step 2 – Access the Clutch Assembly
The clutch assembly can typically be found near the bottom of the washer’s transmission. To access the clutch assembly, you may need to remove the washer cabinet or front panel.
Step 3 – Inspect the Clutch
Once you have access to the clutch assembly, inspect its components for wear and damage. Look for signs of fraying or cracking, which can indicate that the clutch needs to be replaced. You can also clean the clutch with a rag or cotton swab to remove any debris that may be affecting its performance.
Step 4 – Check the Clutch Spring
The clutch spring is an integral part of the clutch assembly, as it helps control the washer’s operation during the spin cycle. Check the spring for damage or stretching, which can cause the clutch to malfunction. If the spring is damaged, you may need to replace it.
Step 5 – Reassemble the Washer
Once you have inspected and repaired the clutch assembly, reassemble the washer, and test it to see if the issue has been resolved.
By following these steps, you can efficiently troubleshoot any clutch assembly issues affecting the spinning operation of your LG washer. If the situation persists and you are not comfortable making the necessary repairs yourself, contact a professional technician. A professional can assess the situation and offer a solution to get your LG washer up and running in no time!
Inspect the motor coupler
The motor coupler is a small and crucial component that connects the washing machine’s motor to the transmission. If the motor coupler is faulty or damaged, it can result in a LG washer not spinning properly. In this section, we’ll explore how to inspect the motor coupler and fix any issues that arise.
1. Gather your Tools
Before you begin, ensure that you have the right tools for this task: a screwdriver, pliers, and an ohmmeter. These tools are crucial when inspecting the motor coupler.
2. Disconnect the Power
Make sure to disconnect the power to the LG washer before you begin the inspection. Safety should always come first.
3. Locate the Motor Coupler
The motor coupler is located between the motor and the transmission. Remove the cabinet of the LG washer to access it. Depending on the model of your LG washer, you may need to locate the motor coupler in a different position, so consult your owner’s manual if necessary.
4. Inspect the Motor Coupler
Now it’s time to inspect the motor coupler. Look for any signs of wear and tear, cracks, or breakages. If the motor coupler looks damaged, then it’s time to replace it. Otherwise, you can perform some further tests with the ohmmeter.
5. Testing the Motor Coupler with an Ohmmeter
Turn on your ohmmeter and test the resistance between the motor and transmission shafts. A good motor coupler should display a significant resistance reading, indicating that the coupler is providing the necessary connection between the motor and transmission.
6. Checking for Mobility
If the motor coupler has a broken or loose spider, it could lead to the LG washer not spinning correctly. The spider is responsible for the connection between the motor coupler and transmission. Check if the coupler is properly attached to the spider or if it’s worn or broken.
7. Replacing the Motor Coupler
If the motor coupler is significantly damaged, it’s essential to replace it. Ensure to choose a genuine LG replacement part to prevent any other issues later on. Make sure to re-assemble all parts back in the correct order and test that the LG washer is now spinning correctly.
8. Call a Professional
If you are not confident in performing these inspections or don’t feel comfortable replacing the part yourself, it’s best to call in a professional to help you. Remember, safety should always be your top priority when working with electrical appliances.
By inspecting the motor coupler carefully, you might resolve the LG washer not spinning issue quickly. Follow the steps mentioned above and ensure that the LG washer is unplugged before beginning the inspection. With the right tools and a little bit of know-how, this issue will soon be a thing of the past.
Examine the tub dampening strap
Examine the Tub Dampening Strap
Another possible culprit for an LG washer not spinning could be the tub dampening strap. This component is responsible for stabilizing the tub during the spin cycle, but over time, it can wear down, become damaged, or even break completely.
To check if this is the issue, first, unplug the washer and remove the back panel. You should be able to locate the tub dampening strap, which is usually made of rubber or plastic. Give it a thorough visual inspection to see if there are any visible signs of wear or damage. If it looks stretched out or has cracks or tears, it may need to be replaced.
LG washers typically have two or four tub dampening straps, so be sure to check them all. If one is damaged, it’s best to replace them all at the same time to ensure even performance during the spin cycle.
Replacing the tub dampening straps is a straightforward process and can be done by most home improvement enthusiasts. First, detach the old straps by removing the screws or bolts holding them in place. Next, install the new straps and secure them with the proper hardware. Be sure to follow the manufacturer’s instructions and use the correct replacement parts.
If you’re not confident in your ability to replace the tub dampening straps yourself, it’s always best to seek the help of a professional. The cost of repair will vary depending on the extent of the damage and the labor involved.
Regularly inspecting your LG washer’s tub dampening straps can help prevent issues with spinning and prolong the lifespan of your machine. Keep an eye out for signs of wear and replace them as needed to ensure a smooth and efficient spin cycle.
Inspect the idler pulley
Another important component of your LG washer’s spinning mechanism is the idler pulley. It is responsible for applying the correct amount of tension to the drive belt, which drives the washer’s drum. If the idler pulley is not functioning correctly, you might experience problems with your washer’s spin cycle.
First, check for the presence of any debris or foreign objects within the pulley. Look for debris such as lint, dust or even small pieces of fabric, which can prevent the pulley from functioning properly. If the pulley is dirty, a simple wipe-down with a damp cloth can do the trick.
Next, check for signs of wear and tear on the pulley wheel. If the wheel is cracked, worn or otherwise damaged, it may need to be replaced. Look for any signs of wobbling or a loose pulley, which indicates that it may need to be tightened or replaced.
If the idler pulley appears to be in good condition, you should check the tension on the drive belt. If the belt is loose, it may cause the idler pulley to slip, which will affect the washer’s spin cycle. Adjust the tension on the belt by loosening the motor mounting bolt and moving the motor to adjust the tension of the belt.
If the idler pulley needs to be replaced, it is relatively simple to replace it yourself. First, unplug the washer and then locate the idler pulley. Remove the mounting bolt, and then slide the old pulley out of the bracket. Slide the new pulley back into the bracket, and then tighten the mounting bolt. Make sure to test it out before moving on to the next step.
By inspecting and maintaining the idler pulley, you can help to prevent costly repairs and keep your LG washer functioning properly for years to come.
Check the pump pulley and motor
Another possible cause of your LG washer not spinning could be due to issues with the pump pulley and motor. The pump is responsible for draining the water out of the machine, allowing the motor to create movement and rotation in the drum. If the pump or motor malfunction, it can prevent your washer from spinning.
To check the pump pulley and motor, start by disconnecting the machine from its power source and water supply. Then, locate the pump and motor by referring to your user manual or online resources. Once you have located them, examine the pump pulley to see if it’s loose, broken, or worn out. If there are any signs of damage, replace it with a new one.
Next, inspect the motor and its belt. Ensure that the belt is not damaged or loose, and replace it if necessary. Additionally, check the motor for any loose cables or wires that could cause it to malfunction. Tighten or replace any damaged components to ensure the motor is operating correctly.
If you find that either the pump pulley or motor is the root cause of the problem, it’s a good idea to replace both at the same time to prevent future issues. Most hardware stores or online suppliers will have the replacement parts you need to complete the repair.
Once you have replaced the damaged components, reconnect the machine to its power source and water supply. Run a test cycle to see if the issue has been resolved. If the washer spins successfully, you have fixed the problem. If the washer still does not spin, it may be time to call in a professional to diagnose the issue further.
Taking care of your LG washer involves regular maintenance and repairs when needed. By checking the pump pulley and motor, you can identify and fix your washer’s spinning problem quickly and efficiently.
Examine the drain hose
Examine the Drain Hose:
Another crucial area of your LG washer that could potentially be causing an issue with the spinning function is the drain hose. It’s important to check the drain hose for any kinks, bends, or clogs as these blockages can prevent the water from flowing out of the machine and can cause the spinning not to work properly.
If you find a kink or bend in the hose, try to straighten it out as best as you can. If there is a clog, try clearing it with a plumbing snake or by flushing water through the hose with a garden hose.
Also, make sure the hose is not too long, as this can cause water to back up into the machine. The ideal length for a drain hose is around four feet.
If you find that the drain hose is damaged or severely clogged, it may be best to replace it altogether. Fortunately, these hoses are relatively inexpensive and can be easily sourced from most home improvement or appliance stores.
In summary, taking a few minutes to examine the drain hose can not only help fix your washer’s spinning issue but can also prevent potential problems in the future. Make sure to inspect it regularly and keep it clean and free of any debris.
Check the drain pump filter
Check the Drain Pump Filter
One of the most common causes of a LG washer not spinning is a clogged drain pump filter. Luckily, this is also one of the easiest issues to fix yourself without needing the help of a professional.
The drain pump filter is responsible for catching any debris or foreign objects that may have been left in your clothing during the wash cycle. Over time, it can become clogged with these items and impact the washer’s ability to spin properly.
To check and clean the drain pump filter, follow these simple steps:
1. Locate the filter: The drain pump filter is usually located in the bottom front of your LG washer. Look for a small access panel that can be removed to access the filter.
2. Empty the water: Before removing the filter, you’ll need to empty any excess water from the washer. You can do this by placing a towel on the floor and slowly unscrewing the drain plug at the bottom of the washer.
3. Remove the filter: Once the water has been drained, remove the access panel and locate the drain pump filter. Carefully unscrew the filter cover using a pair of pliers or a wrench.
4. Clean the filter: With the filter removed, clean it thoroughly using warm water and a soft toothbrush to remove any debris. You may also want to check the filter housing for any clogs that may have been missed.
5. Reinstall the filter: Once the filter is clean, screw it back into place and replace the access panel. Ensure that everything is screwed tightly and securely to prevent any leaks.
If your LG washer still isn’t spinning after cleaning the drain pump filter, it may be time to call in a professional for a more in-depth diagnosis and repair. However, by keeping your drain pump filter clean and free of debris, you’re doing your part to ensure your washer spins smoothly and effectively.
Examine the tub bearings
Another possible cause of your LG washer not spinning could be worn out tub bearings. If you’re hearing a loud, continuous noise during the spin cycle, this could be a sign that the tub bearings need to be replaced.
To examine the tub bearings, first, unplug the washer from the power source. Then, remove the back panel of the washer to access the tub bearings. You’ll need to remove the drive belt and pulley to fully inspect the bearings. If you notice rust or damage, you’ll need to replace the tub bearings.
Replacing tub bearings can be a challenging task, and it’s often recommended to seek professional help. However, if you feel comfortable, here are the steps to replace the tub bearings:
1. Remove the old bearings: Once you’ve identified the bearings that need replacing, remove them with a bearing puller tool.
2. Clean the area: Thoroughly clean the area where the old bearings were with a rag or brush, and make sure there’s no debris or dirt.
3. Install new bearings: Install the new bearings by pressing them into place with a bearing press tool.
4. Reassemble: Reassemble the washer, ensuring you’ve correctly installed the new bearings.
If you’re not comfortable with replacing tub bearings yourself, it’s best to call a home appliance repair specialist to get the job done. Additionally, it’s a good idea to have your washer checked every couple of years to ensure the bearings are in top condition and avoid any potential issues.
Inspect the stator
If a LG washer is not spinning, a common culprit could be a faulty stator. The stator is a key component in the washer’s motor, responsible for generating the electromagnetic field that powers the rotation of the drum.
To inspect the stator, first, unplug the washer and turn off the water supply. Next, locate the stator on the motor. It should be located at the back of the motor, connected to the rotor through a belt.
Once you have located the stator, visually inspect it for any visible signs of wear or damage. Check for any visible cracks, breaks, or deformities in the stator’s casing. Also, make sure that the wiring and connectors are firmly in place and not loose.
If the stator appears to be damaged or faulty, it may need to be replaced. However, before replacing the stator, it’s important to ensure that the issue actually lies with the stator and not another component of the washer.
One way to test the stator is to use a multimeter to measure its electrical resistance. To do this, first, disconnect the wires that connect the stator to the washer. Then, using the multimeter’s ohm setting, measure the resistance between the stator’s terminals. Refer to your washer’s manual for the correct resistance value for your specific model of LG washer.
If the multimeter reading is significantly different from the specified value, the stator may need to be replaced. However, if the reading is within the correct range, the issue may be with another component of the washer, such as the motor control board or the rotor.
In conclusion, if your LG washer is not spinning, it’s important to inspect the stator for any signs of damage or wear. This will help you determine if the stator is the source of the issue and whether or not it needs to be replaced. Remember to always refer to your washer’s manual and exercise caution when working with electrical components.
Check the rotor position sensor
The rotor position sensor is an important component of your LG washer as it controls the spinning cycle. When it’s not functioning properly, you’ll notice that your washer is not spinning as it should.
To check the rotor position sensor, you’ll need to open up the washer’s back panel. The sensor is located at the bottom of the motor, so you’ll need to remove the motor to get to it. Before starting this process, ensure that the washer is disconnected from its power source.
Once you’ve removed the motor, you’ll find the rotor position sensor attached to the stator. You can remove it by using the appropriate screwdriver. Make sure that you don’t damage the wires while doing this.
After removing the sensor, it’s important to check for any signs of damage such as corrosion or wear. If you notice any damage, you’ll need to replace the sensor. However, if it looks fine, you can test it using a multimeter.
Set the multimeter to the ohms setting and connect it to the sensor’s terminals. You should get a reading of approximately 10 ohms. If the reading is outside of this range, you’ll need to replace the sensor.
Once you’ve replaced the sensor, make sure that you secure it properly and reconnect all of the wires. Test the washer by running it through a full cycle to ensure that the spinning problem has been resolved.
Checking the rotor position sensor can be a little time-consuming, but it’s necessary to ensure that your LG washer is operating correctly. By following these steps, you can easily diagnose and fix the issue.
Examine the control board
The control board is an important part of your LG washer. It is responsible for controlling the various functions and operations of the machine, including the spinning cycle. If your LG washer is not spinning, one of the first things you should check is the control board.
To examine the control board, you will need to first turn off the power to the machine. You can do this by unplugging it from the power source or turning off the circuit breaker. Once the power is off, locate the control board on the machine. It is usually located on the back of the machine, inside a plastic case.
Inspect the control board for any signs of damage or corrosion. If you notice any burnt or swollen components, this may indicate a faulty control board. In this case, you will need to replace the control board.
If the control board appears to be in good condition, you can move on to checking the connections. Look for any loose or disconnected wires, and make sure all connections are secure. If you find any loose connections, tighten them up using a pair of pliers.
Another issue that may cause your LG washer not to spin is a malfunctioning door switch. The door switch is responsible for detecting when the door is closed and locked, allowing the washing machine to start and operate. If the door switch is faulty, it may prevent the machine from spinning.
To check the door switch, first, make sure the machine is unplugged and disconnected from any power sources. Open the door of the washer and locate the door switch. It is usually located on the inside of the door frame.
Inspect the door switch for any signs of damage or wear and tear. If it appears to be in good condition, use a multimeter to test its continuity. You should get a reading of zero when the switch is closed and infinity when it is open. If your reading is different, the door switch is faulty and needs to be replaced.
In conclusion, if your LG washer is not spinning, it may be due to a faulty control board or a malfunctioning door switch. By examining these components carefully and following the steps outlined above, you can easily fix these issues and get your washing machine working properly again.
How to troubleshoot LG Washer Not Spinning
A washing machine is a crucial appliance in any household, and LG washers are known for their quality and durability. However, if your LG washer stops spinning, it can be frustrating and may disrupt your daily routine. Don’t worry; there are several troubleshooting steps you can take before calling a repair technician. Here are some essential tips to help you identify and fix the issue.
1. Check the Power Source
Before you start checking the washer, make sure that it’s plugged in and that the outlet is working. It may sound obvious, but sometimes a tripped circuit breaker or a loose plug can cause the washer to stop spinning.
2. Check the Load
Overloading the washer can cause a variety of problems, including a lack of spinning. Remove excess clothes from the drum, and try running the cycle again.
3. Check the Door Latch
A defective door latch can prevent the LG washer from spinning. Ensure that the door is securely latched and that the wash cycle has started.
4. Check the Drainage
A clogged drainage system can cause the washer to stop spinning. Check the drain hose and remove any blockages that may be preventing the water from leaving the washer.
5. Check the Thermo Fuse
A blown thermal fuse can also cause the LG washer to stop spinning. Locate the fuse and test it using a multimeter. If the fusible link is blown, replace it immediately.
6. Check the Motor
A damaged motor can cause the washer to stop spinning. Test the motor using a multimeter, and if it’s defective, replace it.
7. Check the Drive Belt
A worn-out or damaged drive belt can also be responsible for the LG washer not spinning. Inspect the belt for any damage or wear and tear. If it’s damaged, replace it.
8. Check the Control Board
A defective control board can prevent the washer from spinning. Test the control board and replace it if necessary.
In conclusion, if your LG washer is not spinning, don’t panic. Follow the tips mentioned above to troubleshoot the issue and save yourself a lot of money on expensive repairs. However, if your attempts to fix the washer fail, seek the help of a professional repair service. Remember to handle the washer carefully and always follow safety procedures during the troubleshooting process.
When to call a professional
While there are several DIY fixes that you can try out to get your LG washer spinning again, there could be instances where calling a professional is the best course of action. Here are some situations where it could be time to put down the tools and call in the experts:
1. When you have exhausted all troubleshooting steps: If you have tried all the tips we mentioned earlier in this article and your washer is still not spinning, it could be an indication of a more serious problem that requires professional intervention.
2. If you are not confident in your mechanical skills: If you are not comfortable with taking apart your washer or do not have experience with repairing appliances, it may be wise to leave the job to someone who has expertise in the field.
3. When the washer is still under warranty: If your LG washer is still under warranty, it is best to get in touch with the company to get a technician to check on the problem. Attempting to fix it yourself could void the warranty.
4. If there are visible signs of damage: If you notice physical damage to your washer such as a loose drum or a damaged belt, it is best to call a professional to handle it.
5. Electrical issues: If you suspect that there is an electrical issue with your washer, it is highly recommended that you call a professional right away. Electrical issues can be dangerous and should not be dealt with without appropriate expertise.
Remember, your safety and the safety of your appliances should always be a top priority. If you are unsure about how to proceed with a repair or are concerned about the complexity of the problem, it is always prudent to call a licensed and trained professional to ensure that your washer is repaired properly.
Conclusion
We hope that these 8 tips have helped you in fixing your LG washer that is not spinning. Remember, before attempting any of these fixes, it is important to read the user manual and turn off the appliance’s power supply.
If your efforts fail, it is advisable to contact a professional technician for assistance. DIY fixes can be risky and may cause further damage to the appliance.
As a home improvement enthusiast and expert, we understand the importance of a well-functioning washer in your daily routine. These tips can help you save time and money, while also improving the lifespan of your LG washer.
Always prioritize regular maintenance of your washer, ensuring it is clean and its components are lubricated. This will not only help in fixing issues like the washer not spinning but also prevent future issues.
In conclusion, we hope that you were able to fix your LG washer and have a better understanding of the common reasons why a washer may not be spinning. Happy washing!