Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

Photo of author
Written By Maria K.

 

Introduction

One of the most critical appliances in any modern kitchen is a refrigerator. It plays a vital role in keeping our food fresh and safe for consumption. However, if your refrigerator’s compressor is running but not cooling, it can be quite frustrating. This issue can cause your food to spoil and lead to potential health hazards.

In this article, we will examine nine possible solutions to fix a fridge compressor that’s running but not cooling. As a home improvement enthusiast and expert, I have personally dealt with this problem several times, and I am confident that these solutions will help you troubleshoot and fix your fridge compressor quickly.

Before diving into these solutions, it’s essential to understand how a refrigerator works. The compressor is the heart of a refrigerator that circulates the coolant in the system, allowing it to absorb heat from inside the fridge and release it outside. If the compressor is not functioning properly, it can lead to various issues, including the fridge not cooling correctly or at all.

So, without further ado, let’s explore the nine ways to fix your fridge compressor that’s running but not cooling.

Reasons for Fridge Compressor Not Cooling

If your fridge compressor is running but not cooling, it could be due to several reasons. In this section, we will discuss the common reasons why your fridge compressor may not be cooling properly and what you can do to fix it.

1. Dirty Condenser Coils: If your fridge’s condenser coils are covered with dirt, dust, or pet hair, they can’t release heat properly and cause your fridge to stop cooling. Clean the coils regularly with a soft brush or vacuum cleaner to keep them clean.

2. Faulty Compressor Fan: The compressor fan helps to move the hot air away from the compressor and cool it down. If the fan is not working, the compressor will overheat, and the fridge will stop cooling. Check the fan and replace it if necessary.

3. Leak In Cooling System: A refrigerant leak can cause your fridge to stop cooling. If you notice a hissing sound, ice build-up, or oily residue on the compressor, you might have a leak. Call a professional technician to fix the leak and recharge the refrigerant.

4. Faulty Thermostat: If the thermostat is not working correctly, it can’t signal the compressor to turn on or off, causing your fridge to stop cooling. Test the thermostat and replace it if necessary.

5. Defective Start Relay: The start relay helps the compressor start. If it’s not working correctly, the compressor won’t start, and the fridge won’t cool. Test the start relay and replace it if needed.

6. Malfunctioning Overload Protector: Overload protector protects the compressor from overheating and burning out. If it’s not working correctly, the compressor won’t start or will stop running, and the fridge won’t cool. Test the overload protector and replace it if necessary.

7. Clogged Capillary Tube: The capillary tube helps to regulate the flow of refrigerant into the evaporator. If it’s clogged with dirt or debris, the refrigerant can’t flow properly, causing the fridge to stop cooling. Clean the capillary tube or replace it if needed.

8. Faulty Evaporator Fan: The evaporator fan circulates cool air inside the fridge. If it’s not working correctly, the fridge won’t cool. Test the fan and replace it if necessary.

9. Failing Compressor: The most severe reason for a fridge compressor not cooling is a failing compressor. If the compressor is not working correctly, it can’t cool the fridge, and it might need to be replaced. Call a professional technician to diagnose and fix the problem.

In conclusion, a fridge compressor can stop cooling due to various reasons, and it’s crucial to find out the root cause before attempting the fix. Some fixes can be DIY, while others require a professional technician. Regular maintenance and cleaning can prevent many of these issues and extend the lifespan of your fridge compressor.

First Step: Check the Basic Functionality

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

Before delving deep into the details of solving a fridge compressor running but not cooling issue, it is important to start with the basics. Checking for basic functionality is the first step in identifying the problem.

The first thing to do is to check if the fridge is plugged in and receiving power. Make sure that the outlet is working by plugging in another appliance or device. If the outlet is faulty, it needs to be repaired or replaced.

Next, check the door seals. Ensure that they are tightly sealed without any gaps or cracks. If there are any issues, replace the seal or have it repaired.

Another basic aspect to check is the temperature settings. Ensure that the temperature settings are correct and that the fridge is set to the appropriate level. If the temperature settings are too high, the fridge will not cool effectively. Make sure that the thermostat isn’t set to “off” or “defrost” mode.

After ensuring that the above basic aspects are functioning correctly, it’s time to troubleshoot further. Check for any ice build-up in the freezer or cooling coils of the fridge. If there is excessive ice build-up, then the defrost system is not working correctly. This can cause the compressor to continually run without cooling the fridge, resulting in higher energy bills.

Lastly, check the condenser coils at the back of the fridge to see if they are clogged with dust or debris. Dirty condenser coils can lead to poor cooling performance, as they are unable to dissipate heat. Use a vacuum or brush to clean the coils regularly.

In conclusion, checking for basic functionality is essential in identifying any issues with a fridge running but not cooling efficiently. By ensuring that the fridge is plugged in and receiving power, door seals are tight, temperature settings are correct, defrost system is working, and condenser coils are clean, you can potentially save yourself from costly repairs or replacement.

Second Step: Clean the Condenser Coils

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

If your fridge compressor is running but not cooling, the second step to fix it is to clean the condenser coils. This is an important maintenance task that should be done at least once a year to keep your fridge running efficiently. The coils are located on the back of the fridge or underneath it, and they play a key role in cooling the refrigerant and releasing the heat.

Over time, dust, dirt, pet hair, and debris can accumulate on the condenser coils, reducing their ability to dissipate heat. This can cause the compressor to work harder and longer, leading to higher energy bills, and can even cause the compressor to fail. Cleaning the coils is a simple and inexpensive task that can save you money in the long run and extend the life of your fridge.

To clean the condenser coils, follow these steps:

1. Unplug the fridge from the power source or turn off the circuit breaker.

2. Locate the condenser coils. Depending on the model, they may be on the back of the fridge or underneath it. If they are on the back, you may need to pull the fridge away from the wall to access them.

3. Use a coil cleaning brush or a vacuum cleaner with a brush attachment to remove the dust and debris from the coils. Be gentle to avoid damaging the coils. Work from the top down to avoid pushing debris into the coils.

4. Make sure to clean the area around the coils, including the fan blades and the drip pan, if applicable.

5. Once you have finished cleaning, plug the fridge back in or turn on the circuit breaker.

Cleaning the condenser coils can help improve the performance and efficiency of your fridge, and it’s something that you can do yourself. It’s also a good idea to check the coils periodically and clean them as needed. By taking care of your fridge, you can enjoy fresh and cool food for years to come.

Third Step: Check the Evaporator Fan

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

If your fridge compressor is running but not cooling, a faulty evaporator fan could be the culprit. One of the most important parts of your fridge, the evaporator fan circulates cool air throughout the unit and helps regulate the temperature. If it stops working, your fridge may not cool properly, causing spoilage of food.

To check if the evaporator fan is working properly, open the freezer and look for any frost accumulation on the back wall. If you notice a buildup of frost, it could be a sign that the fan is not working correctly. You can also listen for the sound of the fan running, if it is quiet or not running at all; it is time to replace it.

Before replacing the fan, make sure to clean any debris or dirt that may be clogging the blades. If the blades are still clean, you can safely assume that the fan has failed and it is time to replace the evaporator fan motor.

When replacing the evaporator fan motor, be sure to purchase the correct replacement part for your refrigerator model. To do this, make a note of the make, model, and serial number of your fridge and search for the corresponding fan motor online. Alternatively, you can reach out to a qualified appliance repair technician to help you with the replacement process.

In conclusion, a faulty evaporator fan can be the reason why your compressor is running but not cooling. By following these steps and checking the evaporator fan, you can identify and fix the issue, ensuring your fridge operates smoothly and keeps your food fresh.

Fourth Step: Inspect the Thermostat

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

The thermostat is an essential component of your refrigerator. It ensures that the compressor turns on and off as needed to keep the fridge at the right temperature. If your fridge compressor is running but not cooling, the thermostat could be at fault.

To inspect the thermostat, start by unplugging your refrigerator and removing the thermostat cover. You should see two wires connected to the thermostat. Carefully disconnect the wires from the thermostat and use a multimeter to test it.

Set your multimeter to the lowest ohms setting and touch the probes to each of the thermostat’s terminals. The multimeter should read zero ohms if the thermostat is functioning correctly. If the reading is higher than zero, then the thermostat is faulty and needs to be replaced.

If the thermostat is not the problem, then it might be an issue with the wiring. Check all the wires leading to and from the thermostat for damage or loose connections. If any of the wires are damaged or come loose, then they need to be repaired or replaced.

Conclusion

If your fridge compressor is running but not cooling, it can be frustrating and costly. But before you call a repair company or replace your fridge altogether, consider these nine DIY solutions.

Remember, always make sure that you unplug your fridge and wear gloves when handling any of the components. And if you’re unsure about anything or have any concerns, don’t hesitate to call a professional. With the right tools, knowledge and patience, you can fix your fridge and get it working efficiently once again.

Fifth Step: Check the Start Relay

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

Section: Fifth Step: Check the Start Relay

If your refrigerator’s compressor is running but is still not cooling, then your next step should be to check the start relay. The start relay is an important component that helps to initiate the compressor’s motor.

Before checking the start relay, make sure you unplug the fridge first. The location of the start relay varies depending on the make and model of your fridge. If you’re unsure where to find it, check your fridge manual or look up the model online.

Once you have located the start relay, remove it from its housing by gently pulling it straight out. Inspect the relay for any signs of damage such as burn marks or a melted appearance. If it looks damaged, then it’s time to replace the start relay.

If the start relay appears normal, you can use a multimeter to test it. Set the multimeter to continuity mode and touch the probes to the relay’s terminals. If you don’t get a reading, then it’s time to replace the start relay.

If the start relay is working fine, then the problem may be a faulty compressor. In this case, it’s better to call a professional repair service to fix the issue.

In summary, checking the start relay is an important step when troubleshooting a fridge that’s running but not cooling. If it’s damaged, replace it, and if it’s working normally, move on to the next step in the troubleshooting process. Remember to always unplug the fridge before attempting any repairs.

Sixth Step: Inspect the Overload Protector

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

If you’ve checked the other components and your fridge still isn’t cooling properly, it’s time to inspect the overload protector. This component sits near the compressor and is responsible for protecting it from overheating.

To inspect it, first, unplug your fridge and locate the overload protector. It’s usually a small rectangular device with wires connected to it. Remove it from the compressor and shake it gently. If it rattles, it’s likely blown, and you’ll need to replace it.

Next, visually inspect the overload protector for signs of damage or discoloration. If you notice any, it will need to be replaced.

Testing the overload protector with a multimeter is also recommended to ensure it’s functioning correctly. Follow your manufacturer’s instructions on how to do this or consult a professional to handle the task for you.

Replacing the overload protector is a job for a professional, so if you determine that it needs replacing, call a licensed technician to handle the task.

By inspecting the overload protector, you can rule out this component as the culprit for your fridge’s cooling issues. If it’s still not fixed, there may be deeper issues with your fridge and calling in a professional may be your next step.

Seventh Step: Check the Capacitor

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

If you’ve tried all of the previous steps and your refrigerator compressor still isn’t cooling properly, then it’s time to check the capacitor. The capacitor is responsible for starting the compressor and helping it run efficiently.

First, locate the capacitor, which is often located on the back of the refrigerator. You’ll want to unplug the refrigerator before proceeding to avoid any risk of electrocution.

Next, you’ll need a multimeter to test the capacitor. Set the multimeter to the capacitance setting and touch one probe to each capacitor terminal. If the reading on the multimeter is within the range listed on the capacitor, it’s likely not the issue.

If the capacitor appears to be the problem, it will need to be replaced. You can order a new capacitor online or purchase one from a local appliance repair store. Be sure to take note of the capacitor’s specifications, including its voltage and microfarads, so that you order the correct replacement.

Replacing the capacitor is a bit more complicated than some of the other steps in fixing a fridge compressor, so it may be best to consult with a professional if you’re uncomfortable doing it yourself. A professional will have experience with fridge compressor repairs and can ensure that everything is done safely and correctly.

In conclusion, if your fridge compressor is running but not cooling, it’s likely due to an issue in one of these nine areas. By following these steps, you can troubleshoot the problem and get your refrigerator back up and running efficiently.

Eighth Step: Inspect the Condenser Fan

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

If the condenser fan is not working correctly, it can cause the fridge compressor to run but not cool the inside of the fridge. The condenser fan is responsible for pulling air over the condenser coil, which releases the heat that has been absorbed from the inside of the fridge.

To check the condenser fan, you will need to locate it. It is usually located at the back of the fridge, near the compressor. Once you have found it, make sure it is running smoothly and does not wobble or make any unusual noises.

If the condenser fan is not running, it could be due to a faulty motor or a worn-out fan blade. In this case, you may need to replace these parts to get the fan working again.

However, if the fan is running but not blowing enough air over the condenser coil, you may need to clean it. Over time, dust and debris can build up on the fan blades and reduce their efficiency. Use a soft brush or a vacuum cleaner to remove any buildup from the fan blades, being careful not to damage them.

It is also important to check the fan’s wiring and connections. Make sure there are no loose or corroded wires or connectors that could be affecting the fan’s performance. If you spot any issues, replace the wiring or connectors as necessary.

Once you have inspected and cleaned the condenser fan, plug in the fridge and check to see if it is now cooling properly. If not, move on to the next step in our guide.

Ninth Step: Check for Refrigerant Leaks

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

If you’ve gone through all the previous steps and your fridge compressor is still running but not cooling, it’s important to check for refrigerant leaks.

Refrigerant leaks can cause your fridge to lose its cool, and they can be dangerous to both you and your family’s health. Refrigerants are harmful chemicals that can cause serious health problems if they are inhaled.

To check for refrigerant leaks, you need to locate the refrigerant lines that run through your fridge. These lines are usually at the back of the fridge and can be found by pulling the fridge away from the wall.

Inspect the refrigerant lines for any signs of damage or corrosion. If you find any, this could be a sign that your fridge is leaking refrigerant.

Another way to check for leaks is to use a refrigerant leak detector. This tool can detect any refrigerant leaks in your fridge and help you locate the source of the problem.

If you do find a refrigerant leak, you should not attempt to fix it on your own. Refrigerant leaks require professional attention, as they can be dangerous. Contact a licensed technician who can properly repair the leak and recharge your fridge’s refrigerant.

Remember, checking for refrigerant leaks is an important step in ensuring that your fridge is running properly and keeping your food safe. Don’t skip this step if you suspect there may be a leak.

Tools and Supplies You Need

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

Before you begin attempting to fix your fridge compressor, you need to ensure that you have the correct tools and supplies on hand. Not having the right equipment can lead to further damage to your fridge and can even cause injury to you.

Here are the essential tools and supplies you need:

1. Screwdrivers – You will need a flathead and Phillips head screwdriver to disassemble your fridge and access the compressor.

2. Multimeter – This handy tool measures electrical currents and can assist in diagnosing any electrical issues with the compressor.

3. Wrenches – You may also need an adjustable wrench to remove the bolts that connect the compressor to the fridge.

4. Safety gloves – Compressors can get very hot and using gloves is recommended to avoid burns.

5. Safety glasses – Eye protection is crucial when dealing with compressors and their components.

6. Replacement parts – If your compressor requires parts replacement, make sure you have the necessary parts on hand before you start any repairs.

7. Vacuum cleaner – Keeping your fridge clean from dirt and debris is important to maintain proper function. Use a vacuum cleaner to clean out any dust particles or debris around the compressor area.

8. Compressor tester – This is an advanced tool used to measure the efficiency of your compressor and should only be used by those experienced in fridge repairs.

9. Refrigerant gauge – In case of low refrigerant levels, this device will help you monitor and refill the refrigerant level.

With these tools and supplies, you can confidently tackle any fridge compressor issue and fix it effectively. However, in case the repairs seem too complex, do not hesitate to call a professional to assist you.

Tips and Tricks for Easy Repair

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

When it comes to fixing a non-cooling fridge, there are a few tips and tricks that can make the process much easier and efficient. Here are some things to keep in mind when tackling this issue:

1. Check for Obstructions

Before you start disassembling your fridge, make sure that there are no obstructions blocking the air flow around the compressor. This can be anything from furniture to storage boxes to food containers. Clearing the area around the compressor can help improve its efficiency and ultimately lead to better cooling.

2. Inspect the Condenser Coils

The condenser coils are responsible for dissipating the heat generated by the compressor. Over time, these coils can become covered in dust and debris, which can impede their ability to dissipate heat effectively. Inspect the coils and clean them if necessary with a coil cleaning brush and vacuum cleaner.

3. Check the Temperature Control

Sometimes the problem could be as simple as the temperature control settings being incorrect. Make sure that the controls are set to the appropriate temperature and that they have not been accidentally moved or bumped.

4. Replace the Door Gasket

If the door gasket is damaged or worn out, it can allow warm air to seep into the fridge and compromise its cooling ability. Inspect the gasket and replace it if necessary.

5. Test the Thermostat

The thermostat regulates the temperature inside the fridge. If it is malfunctioning, it can prevent the compressor from turning on or off, resulting in a non-cooling fridge. Test the thermostat by turning it up and down and observing the compressor’s response. If the compressor does not turn on or off, you may need to replace the thermostat.

6. Inspect the Fan

The fan circulates the air inside the fridge to promote even cooling. A faulty fan can cause poor circulation and lead to non-cooling. Inspect the fan blades and motor, and replace them if necessary.

7. Check the Refrigerant Levels

If the refrigerant levels are low, it can cause the compressor to work harder than it needs to and result in poor cooling. Check the refrigerant levels using a refrigerant pressure gauge, and recharge the system if necessary.

8. Investigate the Compressor

If none of the above steps have resolved the issue, it’s time to investigate the compressor itself. A damaged or malfunctioning compressor can cause a fridge to stop cooling altogether. Consult an expert to help you diagnose and repair any compressor-related problems.

9. Consider Replacement

In some cases, it may be more cost-effective to replace your fridge rather than investing in repairs. If your fridge is old, outdated, or inefficient, a new one may be a worthwhile investment in the long run.

When to Call a Professional

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

As much as we love DIY projects, sometimes it’s best to leave certain tasks to the professionals. If you’ve exhausted all the options and your fridge compressor still isn’t cooling, it’s time to call in a professional.

Here are a few scenarios where you should consider calling a professional:

1. You’ve tried all the DIY fixes and nothing seems to be working. If you’re still not getting the results you want, it’s time to call in a pro.

2. You’re not comfortable working on electrical appliances. The compressor is responsible for the refrigeration cycle, which involves electrical connections and potentially hazardous refrigerants. Don’t put yourself at risk if you’re not confident in working with electrical appliances.

3. Your fridge is still under warranty. If your fridge is still under warranty, any DIY repair attempts could void the warranty. Save yourself the headache and call in a professional.

4. You don’t have the proper tools or diagnostic equipment. To accurately diagnose and fix compressor issues, you need specialized tools and diagnostic equipment. If you don’t have access to these tools, it’s best to call a professional.

5. You’re unsure of what the problem is. Even if you’re a seasoned DIY-er, it can be difficult to diagnose the exact problem with your fridge compressor. Calling in a professional can save you time and money in the long run.

Remember, hiring a professional doesn’t mean you’re giving up on your DIY spirit. By calling in a pro, you’ll not only get your fridge compressor up and running, but you’ll also learn a thing or two about fridge maintenance and repair. So, don’t hesitate to call in a pro if you’re having trouble with your fridge compressor.

How to Prevent Future Problems

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

Prevention is always better than cure, and the same goes for home appliances. If you want to make sure that your refrigerator runs smoothly and without any problems in the future, here are some tips that you should follow:

1. Regular Cleaning

Clean the coils and other components of your refrigerator every six months to prevent dust and debris buildup. This will improve the efficiency and ensure proper functioning of your refrigerator.

2. Check the Door Seals

The door seals are responsible for keeping the cool air inside the fridge. Check regularly to make sure they are in good condition, and if not, replace them. This will prevent the compressor from overworking and save energy.

3. Temperature Control

Keep a check on the temperature of your refrigerator. Too much heat can cause the compressor to fail, so always set the required temperature mentioned on the manual.

4. Door Capacity

Don’t overload your refrigerator door with heavy and bulky items. It can cause strain and damage to the compressor.

5. Clean Water Dispenser and Ice Maker

If your refrigerator has a water dispenser or an ice maker, they need to be cleaned regularly. Check for any leaks or malfunction that can affect the compressor.

6. Avoid Overstuffing

Do not overstuff your refrigerator with items that can’t fit in it. This can prevent sufficient air from circulating in the refrigerator and might cause the compressor to fail.

7. Allow Free Air Flow

Make sure that there is enough space for hot air to escape from the compressor. Don’t enclose the fridge in corners or around the wall.

8. Moving Your Fridge

While shifting your refrigerator to a new location or cleaning it, always turn off the fridge and wait for it to cool down before unplugging or moving it.

9. Regular Servicing

Regular servicing will detect any minor problems in the refrigerator before they turn into major issues. Get professional servicing annually or as recommended in the refrigerator manual.

By following these simple tips, you can make sure that your refrigerator lasts long without any future inconvenience. These tips will also help in saving energy and minimize the cost of repairs or replacement.

Frequently Asked Questions

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

1. Why is my fridge compressor running but not cooling?

There are several reasons why your fridge compressor is running but not cooling. Some common reasons include a dirty condenser coil, a faulty start relay, or low refrigerant levels.

2. How do I clean the condenser coil?

To clean the condenser coil, you can use a vacuum cleaner or a soft-bristled brush. Make sure to unplug the fridge before cleaning the coil. Gently brush or vacuum the coil to remove any dirt or debris. You can also use a condenser coil cleaner for a more thorough cleaning.

3. What is a start relay, and how do I know if it’s faulty?

A start relay is a small electrical component that helps start the compressor. If the start relay is faulty, the compressor may not start, or it may run for a short time and then stop. To check if the start relay is faulty, you can use a multimeter to measure its resistance. If the resistance is infinite, the start relay is faulty and needs to be replaced.

4. Can I recharge the refrigerant myself?

Refrigerant recharge requires specialized tools and knowledge, and it is not recommended to be done by an amateur. It is best to call a licensed technician to recharge the refrigerant.

5. How often should I clean the condenser coil?

It is recommended to clean the condenser coil once every six months to a year, depending on your usage and the environment.

6. Why is my freezer working, but the fridge is not cooling?

This could be due to a faulty damper control, a failed evaporator fan motor, or clogged air vents. A licensed technician can diagnose and fix the issue.

7. What is a condenser fan, and what does it do?

A condenser fan is a component in your fridge that helps dissipate the heat from the condenser coil. If the condenser fan is faulty or not working correctly, it can cause the fridge to stop cooling properly.

8. How long do fridge compressors last?

The lifespan of a fridge compressor varies, but it typically lasts between 10 to 20 years. Regular maintenance and care can extend the life of your compressor.

9. Can I replace the compressor myself?

Replacing the compressor is a complicated process that requires specialized tools and expertise. It is highly recommended to call a licensed technician to replace the compressor.

Conclusion

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

In conclusion, a fridge compressor running but not cooling can be a frustrating experience for anyone. However, with the right approach and some basic troubleshooting tips, you can identify and fix the problem easily.

When your fridge compressor is running but not cooling, be sure to start by checking the thermostat, condenser coils, and door seals. These are among the main culprits for fridge cooling problems, and they should be your first line of defense.

If you have tried all these tips and your fridge still isn’t cooling properly, you may need to call in a professional for help. They will be able to diagnose the root cause of the problem and come up with an effective solution.

Remember, the key to keeping your fridge in good working order is to perform regular maintenance and cleaning. This includes cleaning the condenser coils, checking and replacing worn or damaged door seals, and keeping the fridge at the correct temperature.

By following these tips and taking good care of your fridge, you can ensure that it stays in top condition and lasts for years to come. So, the next time your fridge compressor is running but not cooling, don’t panic – just follow these simple steps and get it back up and running in no time!

References

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

1. “Why Is My Refrigerator Not Cooling?” Sears Home Services, accessed May 10, 2021, https://www.searshomeservices.com/blog/why-is-my-refrigerator-not-cooling.

2. “Refrigerator Not Cooling: How to Fix Refrigerator Problems.” The Family Handyman, accessed May 10, 2021, https://www.familyhandyman.com/project/refrigerator-not-cooling-how-to-fix-refrigerator-problems/.

3. “Why Is My Fridge Not Cooling?” Mr. Appliance, accessed May 10, 2021, https://www.mrappliance.com/blog/2019/march/why-is-my-fridge-not-cooling-/.

Additional Resources

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

In addition to the tips provided in this article, there are many other resources you can use to troubleshoot and fix a fridge with a running compressor but no cooling. Here are some additional resources to check out:

1. Manufacturer’s manual: Your fridge’s manufacturer’s manual can be a great resource for troubleshooting and maintenance advice specific to your model.

2. YouTube videos: There are many YouTube videos that demonstrate how to diagnose and fix various fridge problems. A quick search on YouTube can give you access to a wealth of helpful information.

3. Home improvement forums: There are many online forums that are dedicated to home improvement and appliance repair. These forums are a great place to ask questions, get advice, and connect with other DIY enthusiasts.

4. Appliance repair services: If you’re not comfortable or confident enough to tackle the problem on your own, don’t hesitate to call in professional appliance repair services. They have the expertise and equipment needed to diagnose and fix even the most complex fridge problems.

By utilizing these additional resources, you can gain a deeper understanding of your fridge’s mechanics and feel more equipped to tackle any issues that arise. Remember to always prioritize safety and follow manufacturer’s guidelines when attempting any DIY repairs.

Author Bio

Fridge Compressor Running But Not Cooling: 9 Ways To Fix It

As a home improvement enthusiast and expert, I have spent several years perfecting my skills and knowledge in the field. My passion for home improvement started at a young age, where I would spend hours tinkering with appliances and fixing things around the house.

Over the years, I have gained a wealth of knowledge in various areas of home improvement, ranging from plumbing and electrical work to woodworking and furniture restoration. Through my experiences as a DIYer and a professional contractor, I have developed a keen eye for detail and a knack for problem-solving.

Through my writing, I hope to share my expertise with others in the home improvement community and inspire them to take on their own projects. My ultimate goal is to empower homeowners and DIYers with the knowledge and tools they need to transform their homes into their dream spaces.

Whether you are a seasoned pro or a beginner, my articles are designed to provide you with practical tips and expert advice that you can apply to your own home improvement projects. So join me on this journey to transform your home and unleash your creativity!

Leave a Comment