Brad Nailers vs Finish Nailers – Everything To Know (2020)

| |

Best Brad Nailer
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
Best Finish Nailer
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
Title
DEWALT 20V MAX Cordless Brad Nailer Kit
DEWALT 20V MAX Finish Nailer
Test Result
Test Result 9.9/10 Excellent August 2020
Test Result 9.8/10 Very Good August 2020
Nail Gauge
18 gauge only
15 or 16 Gauge
Hole Size (mm/ inches)
1.41 mm / 0.055″
15 gauge: 1.41 mm / 0.055″ or 16 gauge: 1.68 mm / 0.066″
Nail Length
Up to 51mm / 2″
Both shoot up to 63.5mm / 2-1/2″
Use Case
More delicate woodwork
More robust and heavier woodwork
Performance
Value for Price
Pros
  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions
  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile
Cons
  • No so good with large & thick wood
  • Not so great with thin & delicate materials
Best Brad Nailer
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
Title
DEWALT 20V MAX Cordless Brad Nailer Kit
Test Result
Test Result 9.9/10 Excellent August 2020
Nail Gauge
18 gauge only
Hole Size (mm/ inches)
1.41 mm / 0.055″
Nail Length
Up to 51mm / 2″
Use Case
More delicate woodwork
Performance
Value for Price
Pros
  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions
Cons
  • No so good with large & thick wood
Check Price on Amazon
Best Finish Nailer
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
Title
DEWALT 20V MAX Finish Nailer
Test Result
Test Result 9.8/10 Very Good August 2020
Nail Gauge
15 or 16 Gauge
Hole Size (mm/ inches)
15 gauge: 1.41 mm / 0.055″ or 16 gauge: 1.68 mm / 0.066″
Nail Length
Both shoot up to 63.5mm / 2-1/2″
Use Case
More robust and heavier woodwork
Performance
Value for Price
Pros
  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile
Cons
  • Not so great with thin & delicate materials
Check Price on Amazon

Brad Nailers vs Finish Nailers – Everything To Know

A lot of people are lost when it comes to brad and finish nailers.

uhAll of the nailers look really alike and the untrained eye might think there is no difference at all and at a brad nailer & finish nailer could be used for the same things.

But that is not the case.

Brad nailers do appear like shorter frame nails in several respects.

The fact is, they have various applications where they can be used.

Therefore it is necessary to pick the right one for the task.

To order, attempt and clear up any of the ambiguity, let’s look at these two tools to fully grasp them, and you can be sure to pick the correct one for the task.

What is the Gauge for Brad Nailer & Finish Nailers? 

It’s necessary to familiarize yourself with the nail gauge before digging into the variations between these tools.

Nailer specific gauge sizes are 15, 16 & 18.

Simply stated, the larger the gauge value, the thinner the nail.

The reason for that is very plain …

The figure accounts for the amount of nails per inch.

An 18 gauge, for example, will have 18 nails per inch and would be thinner than 16 gauge nails, which would be able to pack 16 nails per inch.

Brad NailerFinish Nailer
Nail Gauge18 gauge only15 or 16 Gauge
Hole Size mm / inches1.41 mm / 0.055″15 gauge: 1.41 mm / 0.055″
16 gauge: 1.68 mm / 0.066″
Nail Length mm / inchesUp to 51mm / 2″Both shoot up to 63.5mm / 2-1/2″
Recommended UsesSmooth finnish for more delicate workFixating bigger and tougher materials

Our Best Brad Nailer & Finish Nailer Products

Best Brad Nailer
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
Best Finish Nailer
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
Title
DEWALT 20V MAX Cordless Brad Nailer Kit
DEWALT 20V MAX Finish Nailer
Test Result
Test Result 9.9/10 Excellent August 2020
Test Result 9.8/10 Very Good August 2020
Nail Gauge
18 gauge only
15 or 16 Gauge
Hole Size (mm/ inches)
1.41 mm / 0.055″
15 gauge: 1.41 mm / 0.055″ or 16 gauge: 1.68 mm / 0.066″
Nail Length
Up to 51mm / 2″
Both shoot up to 63.5mm / 2-1/2″
Use Case
More delicate woodwork
More robust and heavier woodwork
Performance
Value for Price
Pros
  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions
  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile
Cons
  • No so good with large & thick wood
  • Not so great with thin & delicate materials
Best Brad Nailer
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
Title
DEWALT 20V MAX Cordless Brad Nailer Kit
Test Result
Test Result 9.9/10 Excellent August 2020
Nail Gauge
18 gauge only
Hole Size (mm/ inches)
1.41 mm / 0.055″
Nail Length
Up to 51mm / 2″
Use Case
More delicate woodwork
Performance
Value for Price
Pros
  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions
Cons
  • No so good with large & thick wood
Check Price on Amazon
Best Finish Nailer
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
Title
DEWALT 20V MAX Finish Nailer
Test Result
Test Result 9.8/10 Very Good August 2020
Nail Gauge
15 or 16 Gauge
Hole Size (mm/ inches)
15 gauge: 1.41 mm / 0.055″ or 16 gauge: 1.68 mm / 0.066″
Nail Length
Both shoot up to 63.5mm / 2-1/2″
Use Case
More robust and heavier woodwork
Performance
Value for Price
Pros
  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile
Cons
  • Not so great with thin & delicate materials
Check Price on Amazon

The Best Brad Nailer: DEWALT 2DEWALT 20V MAX Cordless Brad Nailer

Brad Nailers vs Finish Nailers

Pros

  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions

Cons

  • No so good with large & thick wood

The DEWALT DCN680 Cordless Brad Nailer explained

The device is constructed from a flywheel.

The brushless motor spins a flywheel at a fast RPM rate and saves energy if you are acquainted with this sort of technology.

The driver blade touches the rotating flywheel when the button is pushed, and passes energy to the bladder.

The razor drives forward to force the nail in. There are return springs in the head of the tool which set the driver blade back to its original position.

With either the trigger or the bump guard engaged, the cycle can then repeat.

The best aspect is that if the DEWALT flywheel speeds up to its rotational rpm, the DEWALT nailer is still “at-the-ready.”

That ensures that the fastener fires with zero lag time and the blade resets automatically as you pull the shot.

One fascinating aspect about the DEWALT brad nailer is that you can depress contract protection while in touch [bump] mode and leave it depressed and quick-fire release the device along the work surface, while you slip.

In bump-fire mode, on the other side, you have the right to quickly keep triggering and hit the tool.

Application and Knowledge

The DEWALT brad nailer will move up to 850 nails per load.

The magazine straight of the machine houses 110 nails.

This cordless 18-gauge nailer drives nails lengthwise from 5/8′′ to 2 1/8′′. 

A yellow refill symbol for quick visual identification of small nail concentrations is provided on the magazine.

The tool can shut out until there are 11 brads left over from the magazine.

This amount seems way too high relative to several of the other brad nailers we checked.

Ideally, I’d like the DEWALT nailer to shoot all the brads and then shut out the shooting motion to secure the tool.

DEWALT DCN680 Functions

The DEWALT brad nailer features a flywheel / hammer jam clearing actuator, a flexible actuation system, a tool-free jam escape, tool-free drive change speed, a wire style belt loop and excellent 2 LED lighting.

A switches limited actuation turn between sequential mode and bump fire mode.

The DEWALT DCN680 has a large-size and simple-to-use fast release for a tool-free jam clearing that allows repair convenient for the customer and eliminates downtime.

We mounted around 1000 fasteners, and while checking this nailer, we did not experience one jam.

The Best Finish Nailer: DEWALT 20V MAX Finish Nailer

Brad Nailers vs Finish Nailers

Pros

  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile

Cons

  • Not so great with thin & delicate materials

About the Best Finish Nailer

If you have ever been in the market for a power tool, you have probably come across the DEWALT brand name.

They are reliable and popular for many reasons and this finish nailer is a choice that many consumers turn to. 18 volt power these 20 degree nailers, a popular style that is good for a deep driven nail and consistency for finishing.

It also has both sequential and bump fire modes to choose from.

This kit includes gun, battery, charger and hard case for storage and easy mobility.

It also has easy-to-maintain features and an easy-to-remove nosepiece if nails are jammed.

The ready to charge track can hold 120 nails and also includes an LED light.

What is a pneumatic nailer – Brad Nailers vs Finish Nailers?

A pneumatic nailer is a pneumatic device, which on the one hand is characterized by its special handiness and easy handling, but on the other hand also scores with remarkable safety features.

After all, the main purpose of such a nail gun, as it is popularly known, is to drive nails into materials of various kinds with the help of compressed air.

In this context, wood in all its forms is usually mentioned, although compressed air nailers have long been available that can be used to shoot nails into concrete surfaces or the like.

The advantages of the compressed air brad nailer & finish nailer are obvious

If you consider how strenuous, laborious and energy-sapping it would be, for example in roofing or in the fastening of floor boards, to hammer in every single nail with a hammer, then the costs for the corresponding specialists would certainly rise into the utopian realm, as the time required would be too great.

In this respect, pneumatic nailers not only stand for an extremely efficient and time-saving method of working, but also save you money.

Until today, different types of pneumatic nailers have established themselves on the market, so that there is a suitable tool for every demand and for the most different applications.

Modern devices of this kind are extremely easy to operate, they are mostly ergonomically formed, so that they fit well in the hand.

Depending on the quality, the noise level is even comparatively low, while the individual nails are shot into the designated places.

Basically, with regard to the use of a pneumatic nailer, the target, i.e. the place in which the nail is to be shot, is briefly aimed at and then the device is pointed at the respective area.

Fast, simple and highly efficient – Brad Nailers vs Finish Nailers

Brad Nailers vs Finish Nailers

Certainly, the individual nails come out of the front part of the device “shot-like”, but nevertheless it is not necessary to have a particularly pronounced technical knowledge to be able to handle them.

Safety is of paramount importance, and in addition, it does not hurt to wear appropriate protective clothing when using the nail gun.

Depending on size, there are models that are capable of shooting nails up to 50 mm long.

In addition, there are also higher quality, heavier devices with which you would be able to shoot nails up to 90 cm long.

Furthermore, pneumatic nailers also differ in terms of their shooting modes.

While on the one hand there are nail guns that only shoot one nail at a time at the push of a button, other pneumatic nailers can easily shoot several nails at intervals.

This means that a lot of force is saved, because the finger does not have to press the trigger each time.

This could prove to be particularly strenuous when, for example, large areas of wood or even concrete are to be nailed.

How does a pneumatic nailer work?

The way an air nailer works is in some ways comparable to a pistol or revolver.

However, at the push of a button no ball comes out of the barrel, but with each pressure on the trigger a nail shoots out with a force of about five to 10 bar, which releases from a magazine when the trigger is pressed.

Such a magazine can contain – depending on the device – about 100 to 150 nails.

However, the size of the nails, their thickness and the like are also important.

Brad Nailers vs Finish Nailers

When you press the release button of the pneumatic nailer, a so-called driver is activated, which literally hits the nail, which is next in shooting position, in front of the head.

And this with a considerable pressure, whereby this procedure is by the way the basis for the naming of the pneumatic nailer.

As soon as a nail has been shot out, the next nail, which is in immediate order inside the magazine, immediately follows.

This principle can be roughly compared to the articles on the cosmetics shelf of a perfumery.

If you remove the article in front, the rest of the product portfolio immediately follows in the same order.

Security is a top priority – Brad Nailers vs Finish Nailers

Surely a lot of energy is needed to activate the nail and shoot it out of the device with full force.

This power can be guaranteed on the one hand by connecting a so-called compressed air tacker to an air compressor, so that an adequate supply of compressed air is guaranteed by this.

This is particularly common with classic devices.

A slightly more modern method is to use a compressed air cartridge, so that you benefit from greater flexibility every time you deliver a nail.

In addition, it also depends on which drive technology an air nailer is equipped with, because, for example, devices with battery drive or models that work with gas differ in terms of, among other things, the shooting power.

Thus it behaves with most compressed air nailers in such a way that a nail is only shot if the tool is on a hard, firm underground.

It is a fact that most of the devices of this product category do not release when they are pressed on a soft blanket or even on human limbs.

These give way so that the safety technology immediately receives a kind of signal that no shot must be fired at this point.

In general, when using the pneumatic nailer, you should always make sure that you only use it when you are sure that there is no danger and that the nail you want to shoot at the next moment can only hit the target to be treated.

Pros & Usecases of Brad Nailers & Finish Nailers

This applies to both the private do-it-yourself sector and the commercial segment.

Pneumatic nailers, like Brad Nailers & Finish Nailers, in their various forms are ideal for smaller jobs, but especially when working on larger surfaces, when it comes to hammering nails into the material.

Brad Nailers vs Finish Nailers

There are infinite possibilities, projects and situations where it is necessary to hammer nails into wood, concrete, etc.

For example, when fixing a table leg to a table top, when fixing a wooden door to a cabinet, when fixing roof battens or when designing wooden floor coverings…

There are almost no limits to the creativity of craftsmanship.

However, if only a hammer and nails are available for work such as this, then many renovation or handicraft projects, but also carpentry work, are often doomed to failure in their early stages.

Just imagine how laborious it would be to implement hundreds of nails in roof battens or floor surfaces – and all with the help of a simple hammer.

Such an activity would not only be unnecessarily lengthy under such conditions, but especially on a commercial level, the customer would have to reckon with oversized additional costs.

Even though the purchase of a nailer is therefore connected with a certain amount of costs, it shows that this investment is really worthwhile, because for the user remarkable advantages are connected with the purchase.

With the Brad Nailer & Finish nailer it is so easy to be a craftsman

Using a hammer and nails to do manual work is not only cost-intensive but also laborious.

Not to mention that especially untrained persons do not always succeed in immediately manoeuvring a nail straight into a surface with a hammer.

Often the nails bend, so that this can ultimately even affect the optical quality or the qualitative value of a work.

The remarkable functionality of modern pneumatic nailers speaks for itself.

On the one hand, you have the option of using a nailer that shoots a nail with every press of a button.

On the other hand, there are now also modern products that can be adjusted as required, so that a single push of a button is enough to release nails simply by pressing the pneumatic nailer.

This means that you can even save the individual movements with your index finger.

This can even be a real relief for the wrist, depending on the amount of work to be done.

All in all, pneumatic nailers are literally a guarantee for efficient and precise work.

Considering the fact that the nails are not hammered into the surface to be worked on piece by piece, as is the case with a hammer, but rather that they are hammered in within fractions of a second and with absolute precision, they always arrive straight and purposefully where you want them.

What types of pneumatic nailers are there?

Brad Nailers vs Finish Nailers

If you have decided to purchase a pneumatic nailer, you can choose between different types.

It is worth knowing, however, that the models usually differ primarily in terms of their drive types and power as well as the range of functions.

It is therefore important to take our product report with you at the time of purchase, so that you can find a tool that exactly meets your wishes and requirements as well as the intended use.

A classical variant of the nailer is for example the one where the nailer is coupled to an air compressor by means of a hose. In addition, you also have the option to prefer a mobile version.

These are compressed air nailers, which are either operated with the help of a gas cartridge, or you charge the device with the help of a rechargeable battery.

Depending on the nailer you can then work with the angler for a period of about two to four hours until the device has to be plugged in again or filled with additional gas.

The lighter, the more handy – Brad Nailers vs Finish Nailers

A further criterion for the variety of offers with regard to pneumatic nailers is also the quality of the magazine in various tests.

For the use with regard to the completion of less extensive work, pneumatic nailers with a strip magazine are sufficient.

These are magazines in which several nails are placed one behind the other and which optically have the shape of a strip.

This strip magazine is inserted into the compartment provided for it, so that each time a button is pressed, a nail is shot while the one behind it slides forward a little.

The next time the trigger is pressed, the nail is also shot. This is different with the so-called drum magazine, which under certain circumstances can hold up to 150 nails.

These are not lined up one behind the other like in a snake, but when viewed from above, the whole thing looks like a curl from which the nails slip out when a new shot is fired.

It also depends on the size – Brad Nailers vs Finish Nailers

Brad Nailers vs Finish Nailers

Usually, devices of this type are much more expensive, but the investment is definitely worthwhile.

Because the time you save when using this pneumatic nailer and the associated personnel costs, which do not have to be charged to the customer, speak for themselves.

By the way, compressed air nailers are also distinguished by their own weight.

Smaller models can weigh around 200 grams, while the large models with built-in drum magazine can easily weigh three to four kilograms.

Test criteria: This is how we tested pneumatic nailers – Brad Nailers vs Finish Nailers

Test criterion: net weight

There are different quality criteria that make a pneumatic nailer.

For example, external tests have shown time and again how important it is to have the lowest possible dead weight.

Certainly there are experienced users, who do not mind a higher dead weight of the pneumatic nailer, but nevertheless it often turns out that the performance portfolio of high-quality, stable light weights is simply higher and therefore better results can be expected.

Because the less effort is put into the work, the more precise the work can be.

Test criterion: functionality – Brad Nailers vs Finish Nailers

A test has shown that there are pneumatic nailers that “can” do only one thing: deliver nails in shots.

Of course, this is the function that is in focus, but nevertheless, there are also functional products that are able to deliver nails in intervals without the need to press the trigger separately for each shot.

In addition, many modern, reasonably priced pneumatic nailers allow you to preset that the nails are released at the slightest pressure, so that separate button presses are also unnecessary here. An aspect that certainly helps to save power and time.

Test criterion: Safety features – Brad Nailers vs Finish Nailers

In tests, most of the devices were equipped with special features that help to prevent nails from being delivered as soon as the pneumatic nailer is not set down on a surface with pressure.

This means that it is not easy to hold the nailer up and press it down to make sure that there are no accidents caused by nails coming loose.

In general, the creativity of the suppliers in this respect proves to be incredibly versatile, which of course also has a positive effect on the test results.

Test criterion: flexibility and ease of release – Brad Nailers vs Finish Nailers

Especially with many cheap products, it becomes apparent that every now and then it is necessary to press the shutter release more firmly.

Brad Nailers vs Finish Nailers

If in the course of this, even two nails come loose at the same time, this can have fatal consequences.

Therefore, a smooth and easy running after pressing the release button is indispensable.

At the same time, the user should also benefit from a certain degree of handiness and flexibility in operation.

Test criterion: Noise generation – Brad Nailers vs Finish Nailers

Usually a slight hissing and then a soft bang can be heard, which is usually barely audible with more frequent use.

On the other hand, there are also pneumatic nailers on the market, where the noise level is rather high.

Mostly this is perceived as quite disturbing, so that this can also have a small effect on the ability to concentrate.

Test criterion: low vibration – Brad Nailers vs Finish Nailers

A pneumatic nailer should lie calmly in the hand during the test, shoot the nails slightly and have something to counter the resulting pressure by resting and at the same time being flexible.

And so the test also focuses on the amount of vibration, as this is extremely relevant with regard to the target-orientation when delivering the individual nails.

What do I have to pay attention to when buying a pneumatic nailer – Brad Nailers vs Finish Nailers?

When buying a new nailer, first of all make sure that the tool is suitable for the intended use.

This means, for example, that it is best to use a lightweight nailer with a strip magazine, if you only want to use the tool once in a while.

A heavy tool that holds many nails is not necessary for normal household use.

On the contrary, it has been shown time and again that too large pneumatic nailers can even impair the quality of the work, as it can be more difficult to handle the tool, especially for the layman.

For smaller projects, a tool with a strip magazine weighing up to 2 kg is sufficient, whereas on a professional level, compressed air nailers weighing between three and four kilograms, equipped with a drum magazine so that 300 nails or more can be stored in it, can be used.

???? If you prefer to have a little more room to move when working, it is advisable to use an air nailer with a rechargeable battery, as it can be charged before working.

There is no cable in the way during the work itself, so you can enjoy unrestricted freedom of movement.

By the way, gas-powered devices also do a good job in this respect.

Depending on which project you want to work on with the nailer, the length of the nails also plays a decisive role.

Small devices in this product category are usually capable of shooting nails between 30 and 50 mm long.

Others can “create” nail lengths of up to 40 cm.

This is an advantage, for example, when roof battens or floor slabs need to be joined together.

For do-it-yourself work, however, shorter nails are quite sufficient.

Brad Nailers vs Finish Nailers

Accordingly, we recommend that you use tools for domestic use where the maximum nail length in the magazine does not exceed 30 mm, but this should depend exclusively on what you intend to do with your new pneumatic nailer.

Sometimes you have to work on materials that are not necessarily workable with light equipment and with an average pressure capacity.

For example, is it important to you not only to regularly hammer nails into wood, but also to be able to work on concrete?

Then it depends on a powerful tool that has room for stable, long nails and that works especially with a higher pressure.

Average pneumatic nailers are rather unsuitable for such projects, therefore it is worthwhile to dig a little deeper into one’s pocket.

Do you want optimal comfort while working?

Then you are well advised to rely on pneumatic nailers with ergonomic surface finish.

On the one hand, these nailers adapt themselves optimally to the shape of the palm of your hand, they are light in the hand and they also have a non-slip surface.

This means that even sweaty hands will not slip off easily.

On the other hand you should wear safety or working gloves when working with the pneumatic nailer anyway, to be on the safe side from the beginning.

Internet vs. specialized trade: Where do I buy my Brad Nailers or Finish Nailers nailer best?

It is always worthwhile to take our product comparison to hand, when it comes to buying a pneumatic nailer.

Because it is a fact that the market has a lot to offer in this regard, but the purchase of a nail gun is always a matter of trust.

On the one hand, such a product serves to facilitate the sometimes laborious craft work and to save time, and on the other hand, the safety aspect should definitely also be in focus.

On the basis of our product reports you are therefore sure to play it safe.

Select the equipment from the product report that best meets your requirements and the intended use and take this information to your local dealer.

In most cases the respective devices are in stock on site. If not, they will certainly be happy to offer you the opportunity to order the desired product for you.

Save costs in many ways – Brad Nailers vs Finish Nailers

Sometimes, some sellers assume that you will actually buy the ordered goods, so you may be put under a little pressure.

Nevertheless, it is not uncommon for certain targeted products – of whatever kind – to be out of stock at retail outlets, where the primary goal is to cut costs.

Brad Nailers vs Finish Nailers

Monthly expenses for rent, storage, personnel, etc. can be very difficult for retailers to cope with, so that the business premises are sometimes smaller.

For this reason it is obvious that not every air nailer is actually available for immediate delivery.

The situation is completely different in online trading, where the selection is impressively large.

How good that you have the product comparison at hand and can select the product that suits you best on this basis.

A purchase that is worthwhile – Brad Nailers vs Finish Nailers

Best Brad Nailer
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
Best Finish Nailer
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
Title
DEWALT 20V MAX Cordless Brad Nailer Kit
DEWALT 20V MAX Finish Nailer
Test Result
Test Result 9.9/10 Excellent August 2020
Test Result 9.8/10 Very Good August 2020
Nail Gauge
18 gauge only
15 or 16 Gauge
Hole Size (mm/ inches)
1.41 mm / 0.055″
15 gauge: 1.41 mm / 0.055″ or 16 gauge: 1.68 mm / 0.066″
Nail Length
Up to 51mm / 2″
Both shoot up to 63.5mm / 2-1/2″
Use Case
More delicate woodwork
More robust and heavier woodwork
Performance
Value for Price
Pros
  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions
  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile
Cons
  • No so good with large & thick wood
  • Not so great with thin & delicate materials
Best Brad Nailer
DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
Title
DEWALT 20V MAX Cordless Brad Nailer Kit
Test Result
Test Result 9.9/10 Excellent August 2020
Nail Gauge
18 gauge only
Hole Size (mm/ inches)
1.41 mm / 0.055″
Nail Length
Up to 51mm / 2″
Use Case
More delicate woodwork
Performance
Value for Price
Pros
  • Great for thin & more delicate woodwork
  • Only leaves small nail head holes
  • Can replace glue solutions
Cons
  • No so good with large & thick wood
Check Price on Amazon
Best Finish Nailer
DEWALT 20V MAX Finish Nailer, Angled, 16GA, Tool Only (DCN660B)
Title
DEWALT 20V MAX Finish Nailer
Test Result
Test Result 9.8/10 Very Good August 2020
Nail Gauge
15 or 16 Gauge
Hole Size (mm/ inches)
15 gauge: 1.41 mm / 0.055″ or 16 gauge: 1.68 mm / 0.066″
Nail Length
Both shoot up to 63.5mm / 2-1/2″
Use Case
More robust and heavier woodwork
Performance
Value for Price
Pros
  • Great for heavier duty projects
  • Recommended for 15 or 16 Gauge Nails
  • Creating permanent hold
  • Really versatile
Cons
  • Not so great with thin & delicate materials
Check Price on Amazon

It is worth noting that the terms and conditions of purchase to be borne by the ISP may differ considerably from those that the retailer must adopt in local trade.

Because Internet retailers can usually order huge quantities of goods, the conditions are extremely attractive.

Also, storage costs and rents are only a fraction of what they are.

Furthermore, personnel costs are also comparatively low, as it is simply a matter of having a small number of staff.

These usually do not even have to be on site – unless the dealer has showrooms or visitor-oriented production halls.

It is also a fact that online retailers are happy to pass on the high cost savings to their customers.

They benefit and often even receive attractive vouchers from other suppliers when the desired pneumatic nailer is delivered.

Also the high costs, which the retailer has to bear, he passes on – at least proportionately – to his customers.

This means that when you buy a nail gun in a local specialist shop, you may well be able to co-finance a proportion of the rental, storage and personnel costs.

These are generally added to the cost of the desired article.

Of course, it is possible that local dealers try to compensate for this aspect with good advice.

But how is this to be guaranteed in all cases, when at the same time one is striving to reduce personnel costs?

Not to mention the consulting services offered by online retailers have long since become quite impressive.

Because on the Internet you can choose whether you want advice in an online chat, by telephone or in writing.

Worth knowing & guide – Brad Nailers vs Finish Nailers

Brad Nailers vs Finish Nailers

In the Middle Ages, robust wooden sticks were still used to connect wooden elements.

Only over the centuries did nails made of iron become established in the building and carpentry industry.

Looking back, however, the demands of consumers have continued to rise steadily until today.

This is also true with regard to the duration that a construction or handicraft project should take.

True to the motto: “Time is money”, people have ever since been striving to work as cost-efficiently as possible, so it is not surprising that people started relatively early on to develop machines or catapult-like objects that can be used to hammer nails in more quickly and to join materials of all kinds even more efficiently.

The fact is that it was relatively difficult to find appropriate solutions, and it was not until around the middle of the 19th century that the pneumatic advantages were also used for hammering in nails.

Pneumatic nailers through the ages – Brad Nailers vs Finish Nailers

In general, the 1950s and 1960s were the beginning and at the same time the heyday of pneumatic equipment, even though the size of the plants and systems can sometimes be described as oversized.

The aim was to gradually reduce the size of pneumatic nailing equipment.

And in 1960 the time had come. A company from Germany had succeeded in establishing the first air-operated nailer on the market, which even then had to be connected to a compressor with a hose.

This innovation led to a considerable change in the carpentry and construction industry, but even now the company was striving to constantly simplify this technology.

In the course of time new technical developments conquered the market, and so today, in addition to the classic compressor nailers, battery-powered tools as well as pneumatic nailers, which are powered by gas, are available.

These offer even more flexibility in handling and contribute their part to even more efficient work.

Numbers, data, facts around the pneumatic nailer – Brad Nailers vs Finish Nailers

A pneumatic nailer is, depending on the model, available in different price ranges.

Thus one finds models in the lower price range, which cost about 40 to 50 Euros.

Brad Nailers vs Finish Nailers

Medium-priced devices cost between 100 and 200 Dollar, and also on the price scale upwards there are almost no limits for the manufacturers.

It is therefore easily possible to find pneumatic nailers for around 300 to 400 Dollar, although these tools only score points for small details.

These are, for example, subtleties regarding their functionality or a few grams less weight than other powerful nailers.

The working pressure of an air nailer is usually between 4 and 8 bar, but you should make sure that the compressor also has a capacity of 8 bar.

Because this is the only way to guarantee an optimal performance.

A decisive criterion is also the amount of air that such a tool requires. In this respect, one usually speaks of a litre volume of about 0.1 to 0.9 per shot.

In the private and commercial segment – Brad Nailers vs Finish Nailers

Further relevant factors with the pneumatic nailer are the weight, which is about one kilogram for higher quality products, whereas it can be 2 to 3 kilograms for cheap products.

An average nailer is also characterized by a nail capacity of 100 to 150 pieces, whereby the length of the nails can vary from model to model.

Classic nailers, for example, are designed for a nail length of 10 to 50 mm.

On the other hand, if you choose a professional tool, you can certainly find nailers that can hold nails up to 90 cm long.

But devices like these are rather unsuitable for the use in the do-it-yourself sector, and also the financial expenses for the professional nailers are simply too high and therefore do not stand in any relation to their purpose of use.

FAQ – Brad Nailers vs Finish Nailers

Which manufacturers offer Brad Nailers & Finish Nailers nailers?

Mauk, Prebena, Einhell, DeWalt, Güde, Scheppach, Mannesmann, STIER and Silverline are the best known manufacturers of pneumatic nailers.

How much do I have to pay at least for a Brad Nailers or Finish Nailers nailer?

The cheapest pneumatic nailer can be bought for about 250 Dollar – In the maximum case a pneumatic nailer costs about 500 Dollar.

What is a pneumatic nailer?

Brad Nailers vs Finish Nailers

A pneumatic nailer is also called a nail gun and is a pneumatic tool which can shoot nails into different materials. These nails are placed in a magazine in a row or in a roll.

At the push of a button the nails are then shot into soft materials such as plastic, wood or plaster.

With a pneumatic nailer this is done by compressed air which is produced by a compressor.

Where and how is a Brad Nailers & Finish Nailers used?

The compressed air nailer is used in all kinds of trades such as carpentry, roofing, joinery, prefabricated houses, box making and all kinds of woodworking.

Basically you connect the air nailer with a compressor, a cartridge or a battery and press the end of the shot channel against the object you want to attach to another.

At the push of a button the nail pierces the object and gets stuck in the second object.

Are there alternatives and what are the advantages and disadvantages of a Brad Nailers & Finish Nailers in comparison to other tools?

An alternative to the pneumatic nailer would be the cordless screwdriver.

The cordless screwdriver uses screws that are screwed into a material.

The pneumatic nailer, however, shoots thin nails into the material.

The disadvantage of the cordless screwdriver is that each screw must be screwed in individually.

The pneumatic nailer, on the other hand, shoots several nails in a row, making work faster and more efficient. In addition, the probability of the wood chipping off is lower.

Purchase criteria for Brad Nailers & Finish Nailers: You must pay attention to

With an air-pressure nail gun, weight plays a special role, since it is a tool that is always guided and operated by hand.

The weight plays a major role, especially for longer jobs. The professional tools usually weigh hardly more than 1 kg.

Leave a Comment